NewHilux.net

After having one hell of a sh!t fight removing the oil filter after I dropped the oil on the weekend I’ve invested in one of these.
http://i3.photobucket.com/albums/y77/737pilot/OilFilterTool.jpg

Toyo part number 09228-07501

Got mine for $32.

Hopefully next time I'll retain some skin on my knuckles.

I have a very similar one... makes life much easier !!

I use one of these.. never had a problem.. fit a socket over the end with the extension bar.. easy as pie..

http://cgi.ebay.com.au/OIL-FILTER-WRENC ... 3caa359b2d

Over the years have had all sorts of filter removers, found this one to be the best as it spins from the centre.
One of my cars I couldnt use a strap or chain type so this works well in that situation and it fits alot of sizes.

http://www.machinemart.co.uk/shop/produ ... and/clarke

This is a OS site but must be able to get them here at an auto store.

Macca

Macca wrote:Over the years have had all sorts of filter removers, found this one to be the best as it spins from the centre.
One of my cars I couldnt use a strap or chain type so this works well in that situation and it fits alot of sizes.

http://www.machinemart.co.uk/shop/produ ... and/clarke

This is a OS site but must be able to get them here at an auto store.

Macca

I have the same one too. Becasue all the otheres never got in onto the filter on my last car and even this one was hard. I got mine from Repco. I like the look of the toyota one though.

If you guys are using the metal ring type, put a rag over the filter first, grips it mich better and comes off fine, tends to slip alot metal on metal.