NewHilux.net

Hey all,

Recently unbolted my ARB bash plates from underneath my car and wanted to replace the bolts.

I went down to the local bolt shop and screwed the bolts into the guide, no worries 8x1.25 so I bought a few boxes.

Now when I bolt the bash plate into the chassis it doesn't go in hand tight, then the bolts are different sizes going into the bullbar.

This is a nightmare.

Does anyone have any idea the size and thread of the bolts that go into the chassis and the same for the bullbar?

Thanks,

GD

Sent from my SM-G950F using Tapatalk

This sounds like one for you luke

I thought all the bolts for the same size just different length maybe your previous bolts have been over tightened and pulled the threads

dave g wrote:I thought all the bolts for the same size just different length maybe your previous bolts have been over tightened and pulled the threads

This is what I'm thinking. I'll have to go to my mates and re do the threads I think. See how I go

Sent from my SM-G950F using Tapatalk