Lift Kits Problem

[SR5DAZ]

I have a 2012 sr5 hilux and have just put a 2 inch bilstein kit it on and am now experiencing vibrations changing down into 3rd and 2nd gear. Just wondering if anyone has had a similar problem and if so any ideas as to how to fix the problem

[bluehilux]

Mine does it as well.

It did it before the lift from new.

It's a shit clutch that does it IMHO

[JYELUX]

mines an Auto and it did on take-off after OME lift

if its really proud on the arse end. lift might be too much

viewtopic.php?f=28&t=2339

have a look at this thred guys

Jye

[wyworrie]

The center bearing on the tailshaft needs to be spaced down about 12mm to correct the angles on the joints. This is a common problem with lifts. Some people use wedges to re-align the rear diff housing but in most cases the spacers at the center bearing is enough.

[obiee]

yeh i experience the same problem in me 07 d4d after a 2inch efs lift

[jakelux]

if its really proud on the arse end. lift might be too much


Jye

What rate leafs did you get?

[JYELUX]

if its really proud on the arse end. lift might be too much


Jye

What rate leafs did you get?

i got 400kg under advice from ARB, lifted it 90-95mm, been back an took a leaf out till i get the rest of the wieght on the back, is ok now, spaced center bearing 8mm as well.

viewtopic.php?f=28&t=2339
Its all in this thred, check out the lump of plate i had in the back till i could get back to ARB