NewHilux.net

Hello I am new to this forum and have recently bought a 2014 toyota hilux sr5 with 121,000km on the clock
my readings on a autel ap200 is as follows cold reading
injector 1 reading: 0.7
injector 2 reading; -0.8
injector 3 reading; -1.5
injector 4 reading: 0.2
volume: 13.35
would you change the injectors if the readings are as above?

just wondering even though they are within spec and no real rattly sound present other then the usual stuff from a diesel engine would it still be wise to change them? I have been doing extensive research and have found that baileys is the way to go for a cheap decent set, but I have found a cheap set off ebay (denso) here is the link https://www.ebay.com.au/itm/NEW-DENSO-D ... ctupt=true

Would anybody happen to know are these genuine? why are they so cheap because usually they rrp for 550 to 650 dollars.

Cheers

Let whatever diesel specialist you choose supply the parts, but only choose one that uses denso injectors and genuine fuel filters, if they dont find another.

If you supply the parts a warranty claim would be very hard to pinpoint who is liable and it could be a complete engine.

X2 what martynvella said.

What are the hot values?

Okay so just retested
On startup
Volume 19.25
#1 0.4
#2 -0.2
#3 -0.2
#4 -0.2

30 seconds
Volume 15.27
#1 0.4
#2 -0.2
#3 -1.0
#4 0.1

Warmed up final values

Volume 7
#1 0.9
#2 0.1
#3 -1.8
#4 0.1

#3 is worn but within spec.

I'd check your oil pickup for build up. If that is clean then you could leave them in a while and change them at about 150,0000kms.

Until then its advisable to check your oil pick-up at every oil change. Much written here on that.

okay sweet cheers will do thanks for ur help