NewHilux.net

Guys,

All emails sent.

My apologies.

Got it thanks Brendon

Cheers
Clint

Thanks mate

Brendon, would appreciate a copy at your convenience-
djyates59@hotmail.com

Thanks in advance,
David.

If not already mentioned, put line clamps on both hoses when disconnecting and when the filter change has been done, fit supply hose and remove the clamp but leave the outlet hose off. Prime the filter housing till fuel comes out of outlet, fit the hose and remove the clamp. This way very minimal air will make it to the pump and injectors and will start and run no worries, I do this to all diesels I service, never a hassel. Sometimes the locking colar wont rotate (dry seized) and will come free with the aid of crc and the use of multigrips with the housing mounted in a vice. I also drain the housing, you will be horrified whats at the bottom, clean out with carb cleaner, grease orings lightly. No need for periodical replacement, please, everyone I have done is black!

Hello Hiluxers!

I just changed fuel filter to my 2006 Hiliux without intercooler fitted with Steinbauer. The fuel filter light didn't light up after the change. Has anyone detected the same or has anyone information about this?

Thanks in advance!
-Simon

Hey mate, you still emailing copies of this? If so could you send one to me?
Lloydoyfz450@hotmail.com

Cheers!

Wow, just sent a PM to Brendon requesting a PDF version and Nek minnit i get an email on my phone and BANG there it is!

What a fantastic effort yourself and all the mods do for this wonderful forum.

Thanks again Brendon.

Cheers

Would like a copy when you can please
monson17@bigpond.com



Thanks Michael

copy please buddy
mick.79@live.com
cheers

griffo

Email received. Thank you & great work Brendon, much appreciated.

Sorry to ask, but Can I get a copy to please

s_sypher@hotmail.com

Thanks bud

G'day I might be a bit late for this but could someone please email me a copy to jonmulcahy@bigpond.com,it would be greatly appreciated,thanks.

Hi there,

Could I also have a copy e-mailed. pvd079@hotmail.com
Thanks in advance

Pids

Sunnybank signature service did mine today and replaced all o rings with a flush for 23 doll hairs.. fken love that shop..

Made a big improvement in power as my last one was very clogged up.

thanks!

Changed the fuel filter on mine the other day. Took the old filter out and oput the new one in but damned if I could get the threaded ring to start. Mucked around and noticed that the filter didn't seem to be far enough in the housing. Had a look and found the plastic ring off the top of the old filter was still in the housing. Went on fine after that. When I first took the old filter out I noticed the white plastic thing in the housing and thought it must be a seal seat or something.

And another copy to me please at cinan27@bigpond.com

A

Hi could i please also grab a copy

mathewloncar@hotmail.com

Thanks

Me too please dgrima@hotmail.com