NewHilux.net

Sorry just worked out y it's the one ya can't pull apart

Put a new one in.
Don't mess around keep it clean.

Got a new scv and just wondering what these bits are before i pull off the old one

cheers

Are they guide pins for installing it?

Ah didnt even think of that! Clearly need more sleep or coffee
Cheers for that bud

keleher wrote:Got a new scv and just wondering what these bits are before i pull off the old one

cheers

It appears you have the new (upgraded) Toyota 0422630010, rather than the DENSO original replacement.
You just use the spacer & longer bolts.
Keep it clean & don't drop the bolts make sure the o-ring is central too.

Just wondering what is the difference between the newer (bigger) SCV than the older version? Will it give a better performance or just the same as the older version? Thanks

Ergon wrote:Just wondering what is the difference between the newer (bigger) SCV than the older version? Will it give a better performance or just the same as the older version? Thanks

I'm only guessing mate but I'd say it was more about an improvement in service life than anything else. The earlier type (mine) weren't known for long life.

bloke&tackle wrote:

Ergon wrote:Just wondering what is the difference between the newer (bigger) SCV than the older version? Will it give a better performance or just the same as the older version? Thanks

I'm only guessing mate but I'd say it was more about an improvement in service life than anything else. The earlier type (mine) weren't known for long life.

Thanks

Hey fellas just pulled mine out to check. Having a few little problems just trying to narrow it down. Just wondering what parts are ment to actually move. I have the sealed version that you cannot dismantle. But
Nothing seams to move just wondering if this is normal or I chuck it in the bin and get a new one?
Thanks

When I had mine apart there is just a spring loaded piston up the guts of it that is controlled magnetically.

Sent from my SM-N920I using Tapatalk

Oh rightoo we'll mine definitely didn't move at all. Maybe look into a new one I think. Thanks for the advice!

Hi guys,

I have the old SCV in my 07 Hilux, I bought the upgraded one at ebay and the darn thing did not come with the spacer. I called my local Toyota dealer and they dont have the spacer, they sell the whole kit. I was going to have a local shop create the spacer for me, but I cant seem to find what is the width of the spacer. Does anyone have one that can measure that for me? I would really appreciate it.

Thanks

Hi gents, anyone tried to polish out the score mark on the piston inside the scv? I also saw a youtube video where they polish the cylinder with a dremel. Would like to hear your comments. I am in South Africa and have the 2007 model without the egr cooler.

Anyone?

Give it a go mate, let us know how it goes.


Sent from my iPhone using Tapatalk

Angus@ wrote:Hi gents, anyone tried to polish out the score mark on the piston inside the scv? I also saw a youtube video where they polish the cylinder with a dremel. Would like to hear your comments. I am in South Africa and have the 2007 model without the egr cooler.

Yes, its been done before here viewtopic.php?t=21321

From memory, it seemed to be a reasonable solution but not as good as a new unit.

Anyone know why the thread linked below cannot be accessed?

I want to read more into this SCV as I am replacing mine soon (newer version)

Luxi46 wrote:Matty from Baileys also mentioned increased engine rattle in the thread he did about the SCV.
http://www.newhilux.net/phpbb/viewtopic ... 10&t=20408

sixes wrote:Anyone know why the thread linked below cannot be accessed?

I want to read more into this SCV as I am replacing mine soon (newer version)

Luxi46 wrote:Matty from Baileys also mentioned increased engine rattle in the thread he did about the SCV.
http://www.newhilux.net/phpbb/viewtopic ... 10&t=20408

Although on the surface of things it appears totally unrelated, it is likely due to the legalities and implications to the forum around the leaking injector seats that BDG supplied.
Apologies from the mod team - we are unable to access this topic to bring you relevant information

Hi im planning to clean my fortuners scv. But i have bo idea where the scv is.. can someone post a pic where in the engine can the scv be located

Sent from my POCOPHONE F1 using Tapatalk