Fuel Cooler

Petrol, gas, fuel tanks etc

Fuel Cooler

Postby ryanone on Sun, 23 Sep 2012 9:16 +0000

Hi guys just had my lux on there hoist I'm no mechanic but it was damaged badly and a mechanic friend of myn said it should be replaced, I'm a boilermaker and if i was to buy a new cooler and make up a guard or cover for it would it affect its purpose and what purpose does it serve does it need constant air ?

thanks boys
ryanone
 
Posts: 18
Joined: Sun, 16 Sep 2012 12:16 +0000


 

Re: Fuel Cooler

Postby andy666 on Mon, 24 Sep 2012 5:30 +0000

It does what the name says, cools the fuel as it is returned back to the tank. If you are going to make a guard for it I would recommend using crimesafe security screen. We use it for making radiator guards at work. Extremely strong and won't effect air flow
666 High Idle Kits to suit 05+ hilux Available Here
My Build Thread.
User avatar
andy666
 
Posts: 908
Joined: Sun, 12 Dec 2010 6:07 +0000
Location: Brisbane

Re: Fuel Cooler

Postby jackolux on Fri, 28 Sep 2012 5:31 +0000

I damaged my cooler with a stick or rock ages ago , I just by past it
User avatar
jackolux
 
Posts: 516
Joined: Thu, 12 Apr 2007 1:00 +0000
Location: warragul, VIC

Diesel Fuel Temperature

Postby DeadlyBeast on Sun, 05 Jan 2014 2:16 +0000

Was going to start a new thread but found this one to jump on.
Having hooked up techstream for an analysis I noticed the fuel temp was 57 deg C (fuel tank full - rational for mentioning this will be evident further down)
The vehicle was stationary and Intake air was 40 deg.

Fuel System.PNG

Given the location of the fuel temp sensor I am assuming it reads fuel supply temp - not return fuel temp.

It got me thinking about the fuel cooler and what the return fuel temp should be to prevent condensation, water in fuel and engine failure.

The more I looked the more it seemed like opening a can of worms...

A few related links and interesting reading:
http://www.newhilux.net/forum/viewtopic.php?f=29&t=13035
http://www.newhilux.net/phpbb/viewtopic.php?f=8&t=423
http://www.berrimadiesel.com/home/cool-fuel/

VMN wrote:Just catching up on this thread again. In relation to the fuel cooler, it is my understanding that it is on the return line to the tank so it cools the diesel after it goes through the common rail at up to 156,000 kPa (thats about 22,500 psi before anyone asks). Becasue of this, I don't think you will see a significant change in temps between Brendon's engine fuel temp and those we have with the fuel cooler unless you were running on empty.


Snip:
"Because of the extremely high fuel injection pressure, the fuel in the return line becomes very hot, and a fuel cooling system is used to cool the excess fuel before it is returned to the tank. Besides the obvious effect on safety, if the fuel was not cooled, the fuel temperature in the tank would rise, which in turn means that the temperature of the fuel supplied to the injectors would also rise. Under high-pressure injection conditions, hot fuel reduces fuel delivery from the injectors; although the ECU can compensate to a reasonable degree for fuel temperature variations, cool fuel gives improved combustion and hence improved engine efficiency."

Snip:
"The common rail systems create high fuel temperatures (up to 90 degrees C ). They also have very high fuel flow rates for cooling (up 60 litres per hour) at least 80 percent of this fuel is returned to the tank passing through fuel coolers. "

P1020408.JPG

This road pic was taken before peak temperatures reached. Not suggesting this is the ambient air temp but the fuel cooler is only a foot or so from the road surface.


Given the returned fuel can reach over 80 degrees and many parts of the world can reach over 40 degrees ambient air temp what temperature difference can the D4D fuel cooler achieve?

Can the cooler cool the returned fuel down in hot climates enough to prevent fuel de-rating?

As the fuel tank is also a 'cooling tank' reservoir of sorts its probably another good reason not to run too low on fuel...
You do not have the required permissions to view the files attached to this post.
________________________
2007 SR5 D4D Auto
2014 SR D4D Auto
Build Thread
DeadlyBeast
Moderator
 
Posts: 1914
Joined: Sat, 26 May 2012 7:42 +0000
Location: Top End

Re: Fuel Cooler

Postby 4sullima on Sun, 05 Jan 2014 4:07 +0000

4sullima
 
Posts: 187
Joined: Sat, 28 Apr 2012 10:33 +0000

Re: Fuel Cooler

Postby 4sullima on Sun, 05 Jan 2014 4:23 +0000

Check out this company, it's really interesting, I know it looks like something off fast and furious, but I'm interested either way. $1500 AUD will land you a serious set up, intercooler spray, fuel cooler, intake charge cooler, a tank, and a module that controls everything, (you choose spray activation from throttle position, intake temp etc, your choice) . Everything is external, which I'm a big fan of, not internal, like water/meth.

It was 42 deg in brisbane west yesterday, fuel and intake temps would have been horrific, tried towing my trailer to work in stop start traffic, was not pleasant.

Have a read boys.
http://www.designengineering.com/conten ... more-power
4sullima
 
Posts: 187
Joined: Sat, 28 Apr 2012 10:33 +0000

Re: Fuel Cooler

Postby TRDLuxxy on Tue, 24 Feb 2015 8:46 +0000

Anyone know how many passes the standard fuel cooler has?..
TRDLuxxy
 
Posts: 500
Joined: Mon, 09 Feb 2015 5:24 +0000
Location: Queensland

Re: Fuel Cooler

Postby boxhead55 on Tue, 24 Feb 2015 10:16 +0000

3 rows of 3
User avatar
boxhead55
 
Posts: 2864
Joined: Sat, 15 Jun 2013 3:46 +0000

Re: Fuel Cooler

Postby TRDLuxxy on Tue, 24 Feb 2015 10:21 +0000

boxhead55 wrote:3 rows of 3

Much appreciated, thanks!
TRDLuxxy
 
Posts: 500
Joined: Mon, 09 Feb 2015 5:24 +0000
Location: Queensland

Re: Fuel Cooler

Postby pietas on Fri, 09 Feb 2018 7:29 +0000

Old thread but a question that somebody might be able to answer:

Will it be a straight fit fitting the fuel cooler from 3.0 D4D to a 2.5 D4D? Mine does not have one fitted. Anything that needs to be taken into consideration when doing this?
pietas
 
Posts: 2
Joined: Wed, 13 Sep 2017 1:09 +0000
Location: Cape Town, South Africa


Return to Fuel Systems

Who is online

Users browsing this forum: No registered users and 7 guests