Hello Amigos.
I found a boost controller for the VNT 1kd-ftv turbo. 80 Euros. Plugs into the map sensor.
Hooked it up yesterday, Running it on the 18psi setting with my VMN injector width chip set to maximum injection. Have not tried the other boost settings yet. Running a mechanical boost gauge and have verified the psi increase, was holding 15psi prior to the digibooster.
My central american hilux seems to be a bit different from the Australian versions, built August 2008, 3 pin fuel rail connector, no egr cooler.
Seems to be a good addition for the steinbauer/vmn chiped trucks. More Fuel + More Air = More Fun.
No check engine lights, No limp mode.
Cheers!