NewHilux.net

Gentlemen (and ladies if any), i'm looking through this topic with great interes as my suspension (stock) is now a bit saggy.

With regards to the front springs i was wondering if someone knows the properties of all springs originaly equiped in our trucks/UTEs.

48131-0K790 - Spring Stock on my 2.5 D4d 75KW
48131-0K800 - Spring stock on 06 3.0 D4d
48131-0K850 - Spring stock on later model year 3.0 D4d Auto.

It's way easier for me to get an OEM spring rather than a Aftermarket one so such information would be of great value for me

Hi guys, how much difference can a bigger coil make?

Daniel5667 wrote:Hi guys, how much difference can a bigger coil make?

Bigger ??????????? Difference to what ?????????

Hi guyss im new to this forum. I have a set of king spring ktfr-58mm+5 which i believe is from prado. would this be able to fit into my lux? ur reply is much appreciated

Hi all, looking at bringing up my sagging front end (down to 485mm centre to flare, rear 575mm). Its a 08 V6 manual with the factory alloy bar with spotties and fogs.
Got it down to 3 different King springs, either KTFR-101, KTFR-101T, or KTFR-101HT.
Thinking the T's might be the best, as I'm just looking to bring it up to around 535mm, and as they say factory (514mm) +40mm on all these springs I figure with the alloy bar it might come down 10mm or so.
What's your guys thoughts on this?
Anyone running the tapers or heavy duty tapers?

Sent from my SM-N9500 using Tapatalk

Being a V6, it might sit a little higher, from memory I believe they're about 75kg lighter than the equivalent D4D.