Radiator Support Bracket / Cross member torque specs

[EdgeOutdoors]

Hi guys, iv'e been looking around for a service manual for my Hilux but I can not find it anywhere.
It seems like impossible to find it... Not on the internet or this forum.

I drive a 2014 2.5L diesel extra cab model. I have planned a lot of mods and therefor I need the manual.

This week I'm installing a recoverypoint from ARB, and a ARB rearbumper. So i would need the torquespecs for both.



It would be a great help!

[Spitfia]

You can buy them from eBay pretty cheap

https://www.ebay.com.au/sch/i.html?_from=R40&_trksid=p2062857.m570.l1311.R1.TR2.TRC0.A0.H0.Xhilux+workshop+.TRS0&_nkw=hilux+workshop+manual&_sacat=0

[DeadlyBeast]

50Nm / 37lbf

Rad Support.jpg

Title edited for clarity

[EdgeOutdoors]

Hi, thanks a lot! I torqued the bolts down to 46Nm, that is what I found out somewhere on the internet. Think that is still ok. It was not in the instructions but I also used loctite, so it should be fine for sure!

I don't wanne go up now from 46Nm to 50Nm because it will weaken the loctite...