Kings KTFR-101HDT

[Sixtys Guy]

Just about to order the Kings KTFR-101HD springs to replace my sagged TJM springs and then noticed they have the KTFR-101HDT tapered springs. Anyone running these? I'm not sure which ones to buy now. I have steel bull bar, winch and dual batteries. Any practical help appreciated.

[FAIL]

I ran a KTFR-101HD previously and found after a two years it did sag a bit so I would be worried that the tapered would sag easier. I know run a KTFR-101HHD which gives another 20mm and I run it at a full 3" now and sits much better. (Winch, Bar, Bash plates etc)

[Sixtys Guy]

Thanks for the reply. I can't see the KTFR-101HHD part # on the Kings website. They have;

KTFR-101 RAISED COIL
KTFR-101T RAISED COMFORT COIL
KTFR-101H RAISED COIL (50-100KG)
KTFR-101HT RAISED COMFORT COIL (50-100KG)
KTFR-101HD RAISED COIL (100-300KG)
KTFR-101HDT RAISED COMFORT COIL (100-300KG)

Did you get 3" just from the spring, or do you have adjustable struts? My old TJM springs are actually below standard height, but I only want 2" max lift.