OME BP51

Re: OME BP51

Postby TOYZX on Sat, 09 Jul 2016 10:50 +0000

No worries. Those r the specs from arb. Closed might be a little hard but I could measure some current model factory struts and shocks laying around the back of work, you'll have to wait till Monday tho[WINKING FACE]

Sent from my SM-N920I using Tapatalk
User avatar
TOYZX
Moderator
 
Posts: 2919
Joined: Wed, 08 May 2013 7:58 +0000


 

Re: OME BP51

Postby nicebike on Sat, 09 Jul 2016 11:30 +0000

creaky wrote:
TOYZX wrote:Rito here it is. Bp51 front up to 15: open 550.5 closed 440. 15 on: open 544.5 closed 439.5. Bp51 rear up to 15: open 593 closed 373. 15 on: open 645 closed 400. I have the plain nitro charger specs too if needed.

Sent from my SM-N920I using Tapatalk


That's awesome, thanks for doing that so quickly. Did you measure or was that factory specs ?

Now I've just got to find some specs for the factory shocks. A rough measurement of full open just requires a jack but closed is a bit tougher.


Just pull them off and measure. Much easier in the end, and more accurate. Factory may differ left from right
nicebike
 
Posts: 736
Joined: Thu, 27 Feb 2014 7:28 +0000

Re: OME BP51

Postby Richard on Sat, 09 Jul 2016 12:43 +0000

The combination of traction control and the BP's are brilliant, turns your Hilux into a rally car.

One thing to keep in mind is there's a tendency to get lost in it all thereby knocking the shit out of the vehicle and it's contents. I know that sounds a bit contradictory but there's only so much this system will handle.

Well worth it if you have the dollars.
User avatar
Richard
 
Posts: 904
Joined: Mon, 30 Jul 2007 1:00 +0000
Location: Sunshine Coast Qld

Re: OME BP51

Postby Scratchblades on Fri, 23 Sep 2016 11:49 +0000

Hey All,

Without rehashing an old thread id assume its money well spent, as a builder and the odd weekend away, My 2013 Sr5 is heading into ARB Northside to have the colour coded sahara bar fitted, and that Suspension, ive discussed the weight i carry etc, and im looking forward to it all installed :)

Cheers

SB
Scratchblades
 
Posts: 269
Joined: Wed, 15 May 2013 12:39 +0000

Re: OME BP51

Postby Downesy on Thu, 19 Jan 2017 4:35 +0000

TOYZX wrote:Correct! If the fittee had of read the instructions it tells you that. There r three general settings, one for bar and winch, one for bar only and one for stock ute. Ya do need the correct tools to do so tho.

Sent from my SM-N920I using Tapatalk



Hi TOYZX,

Any chance you could share what the three general compression / rebound settings are? or recommend what I should set mine to? I have the adjustment wrench and want to try sort out mine.

Im having the same issue with the clunking noise over small bumps on road.

I have a Sahara ARB bullbar and dual batteries on the passenger side, the passenger side is louder than the drivers side.


Thanks
-2011 SR5 D4D HiLux-
User avatar
Downesy
 
Posts: 162
Joined: Thu, 23 Sep 2010 7:20 +0000
Location: Perth

Re: OME BP51

Postby TOYZX on Thu, 19 Jan 2017 4:44 +0000

Hey mate! If ya have problems with clunking or knocking go back into ya arb shop amd tell them, I have a whole pallet of warranty struts waiting to be installed! Mostly fords and mazdas but there are a couple of lux ones there. Pm me if ya needs anymore info.

Sent from my SM-N920I using Tapatalk
User avatar
TOYZX
Moderator
 
Posts: 2919
Joined: Wed, 08 May 2013 7:58 +0000

Re: OME BP51

Postby corym on Sun, 26 Feb 2017 8:47 +0000

TOYZX wrote:Rito here it is. Bp51 front up to 15: open 550.5 closed 440. 15 on: open 544.5 closed 439.5. Bp51 rear up to 15: open 593 closed 373. 15 on: open 645 closed 400. I have the plain nitro charger specs too if needed.



Hey Toyzx, any idea why the n80 fronts are so much shorter? Are the 70s compatible for the sake of longer struts?

Cheers mate,

Cory.
corym
 
Posts: 68
Joined: Sun, 12 Sep 2010 12:56 +0000

Re: OME BP51

Postby TOYZX on Sun, 26 Feb 2017 3:23 +0000

Haven't really tried to croos them over or taken any measurements to see if they would. I'd have to have a closer look in the front but I know in the rear the newer shocks are longer because they have movove the top mount on the chassis, it's a little higher. Next time I have one in I'll try and get some measurements of where everything is and compare it to mine to see it it might work.

Sent from my SM-N920I using Tapatalk
User avatar
TOYZX
Moderator
 
Posts: 2919
Joined: Wed, 08 May 2013 7:58 +0000

Re: OME BP51

Postby corym on Sun, 26 Feb 2017 3:52 +0000

That would be magic if you could, thanks mate.
corym
 
Posts: 68
Joined: Sun, 12 Sep 2010 12:56 +0000

Re: OME BP51

Postby Duro on Mon, 06 Mar 2017 6:46 +0000

Just got my 2015+ Hilux fitted with front and rear by Maketracks in Midland. Its a different car on and offload.
Could not recommend it more.
Duro
 
Posts: 2
Joined: Fri, 21 Oct 2016 12:30 +0000
Location: Perth

Re: OME BP51

Postby Chiv on Wed, 03 May 2017 6:39 +0000

Duro wrote:Just got my 2015+ Hilux fitted with front and rear by Maketracks in Midland. Its a different car on and offload.
Could not recommend it more.
How much did they charge including kit?
Thanks
Chiv
 
Posts: 5
Joined: Wed, 05 Apr 2017 8:27 +0000
Location: Western Australia

Re: OME BP51

Postby DeadlyBeast on Sat, 06 May 2017 9:59 +0000

Threads merged
________________________
2007 SR5 D4D Auto
2014 SR D4D Auto
Build Thread
DeadlyBeast
Moderator
 
Posts: 1914
Joined: Sat, 26 May 2012 7:42 +0000
Location: Top End

Re: OME BP51

Postby Scratchblades on Thu, 08 Mar 2018 11:03 +0000

HI Guys,

Has anyone worked out this clunk at low speeds, ive had mine in now for about 3 months and i've discovered i have it, and yes mine has a ARB Bullbar on which was fitted 2 weeks prior to the BP51, if anyone knows the fix that'd be great so im pre-prepared before i go back to ARB Northside in Sydney.

Cheers SB.
Scratchblades
 
Posts: 269
Joined: Wed, 15 May 2013 12:39 +0000

Re: OME BP51

Postby TOYZX on Thu, 08 Mar 2018 11:37 +0000

SB. If you have a clunky or knocking front end ut could be your bp51s. What do you have your compression set at? We have found the best way to check if it's the struts at fault is to turn the compression all the way up and go for a drive. If it makes it better or disappears altogether back them back off amd see if it comes back. If it does then you have a dodgy on or both. You can also try doin one side at a time to pinpoint the problem. Cheers Luke.

Sent from my SM-G955F using Tapatalk
User avatar
TOYZX
Moderator
 
Posts: 2919
Joined: Wed, 08 May 2013 7:58 +0000

Re: OME BP51

Postby Scratchblades on Thu, 08 Mar 2018 1:23 +0000

hey Luke,

Ok they've set mine at comfort setting whatever that means and i admit i quite like it, we did set it at firm which was one set upwards but i found the ride too harsh.

From what i can see visually Compression is at the low end of the scale and Rebound is in the middle of the range
Scratchblades
 
Posts: 269
Joined: Wed, 15 May 2013 12:39 +0000

Re: OME BP51

Postby Scratchblades on Thu, 08 Mar 2018 2:25 +0000

Hey Luke

Suprise suprise , and many thankjs for the advice , ive moved compression from +2 to +6 and the Clunk is complelty gone ! what a bloody difference that has made

Your a Champ ! Thank you !

SB
Scratchblades
 
Posts: 269
Joined: Wed, 15 May 2013 12:39 +0000

Re: OME BP51

Postby TOYZX on Thu, 08 Mar 2018 6:36 +0000

No problem mate! Now go tell the ARB guys your results and they should happily get you a new set or just one if need be. If they try and tell you it's b.s. then go higher as it's a well known problem. Our store has become a bit of a problem solving hub because of our conditions and have had plenty of issues with the bp51s and have done plenty of testing.

Sent from my SM-G955F using Tapatalk
User avatar
TOYZX
Moderator
 
Posts: 2919
Joined: Wed, 08 May 2013 7:58 +0000

Re: OME BP51

Postby Scratchblades on Fri, 09 Mar 2018 5:07 +0000

Thanks Luke,

If it comes back ill let them know their fitting a larger fuel cell, in about a week or 2 when it comes in.
Scratchblades
 
Posts: 269
Joined: Wed, 15 May 2013 12:39 +0000

Re: OME BP51

Postby TOYZX on Fri, 09 Mar 2018 12:11 +0000

Tell them now and they'll have ya new ones to put in when they do ya fuel tank.

Sent from my SM-G955F using Tapatalk
User avatar
TOYZX
Moderator
 
Posts: 2919
Joined: Wed, 08 May 2013 7:58 +0000

Re: OME BP51

Postby Scratchblades on Fri, 09 Mar 2018 1:50 +0000

Hey Luke,

So based on the Compression set at 6 midrange you believe that they should be changed ?
Scratchblades
 
Posts: 269
Joined: Wed, 15 May 2013 12:39 +0000

PreviousNext

Return to Suspension

Who is online

Users browsing this forum: No registered users and 5 guests