Fitting 33'' tyre thread.

Need something to get you rolling?

Re: Fitting 33'' tyre thread.

Postby nicebike on Thu, 25 Feb 2016 12:49 +0000

Richolux150 wrote:
nicebike wrote:Oops :) Be interesting to hear the outcome.

Bent spindle..... :? :? :? Maybe too much rock and roll and right boot on Camp Rd OTW...... :oops: :oops: :oops:


I'd say your installer did pretty well to come up with those numbers given the handicap :lol: Certainly explains why the top plate were set differently from each other. Unless the right foot was the real problem :lol:

Should come up really well when the spindle/upright is replaced. :)
nicebike
 
Posts: 736
Joined: Thu, 27 Feb 2014 7:28 +0000


 

Re: Fitting 33'' tyre thread.

Postby Richolux150 on Thu, 25 Feb 2016 6:17 +0000

Thanks Rory,
Guess a SAS front end will solve my pending scrubbage issues.......the nittos do look big....... :D :D :D,


Hey Nicebike
Yep certainly explains the racing car stance it had with heaps of neg camber..... :lol: :lol: :lol:
Last edited by Richolux150 on Wed, 02 Mar 2016 6:58 +0000, edited 1 time in total.
Cheers Richo
If cat turds were Gold nuggets, I'd be the richest bloke on the block... :lol: :lol: :lol:
User avatar
Richolux150
 
Posts: 662
Joined: Mon, 25 Mar 2013 8:39 +0000
Location: The Goldy

Re: Fitting 33'' tyre thread.

Postby FAIL on Tue, 01 Mar 2016 3:31 +0000

Hey I have been ready through and couldn't find the exact specs so I thought I'd just ask. I've just bought Sidebiter II's and I'm tossing up with 305/65/17 or 285/70/17. They are 17x9 0 offset. I'm running Bilstein 5100 series currently from the US with one more notch to go up and I wanted to know which will be easier to fit? It's on an auto 2012 SR5 with ARB deluxe bar. Cheers in advance
User avatar
FAIL
 
Posts: 111
Joined: Fri, 23 Nov 2012 6:33 +0000
Location: Sunshine Coast

Re: Fitting 33'' tyre thread.

Postby FAIL on Tue, 01 Mar 2016 3:33 +0000

It appears the 305 on these specs will clear the UCA but I just wasn't sure if it would foul anywhere else.

Image

Image
User avatar
FAIL
 
Posts: 111
Joined: Fri, 23 Nov 2012 6:33 +0000
Location: Sunshine Coast

Re: Fitting 33'' tyre thread.

Postby TOYZX on Tue, 01 Mar 2016 4:00 +0000

You'll get plenty of rubbing on ya body mounts and flares etc with either size only more so with the 305s obviously. Time to get the grinder, Hamer and welder out!
User avatar
TOYZX
Moderator
 
Posts: 2919
Joined: Wed, 08 May 2013 7:58 +0000

Re: Fitting 33'' tyre thread.

Postby FAIL on Tue, 01 Mar 2016 8:09 +0000

so for ease of fitment perhaps 285 will be easier?
User avatar
FAIL
 
Posts: 111
Joined: Fri, 23 Nov 2012 6:33 +0000
Location: Sunshine Coast

Re: Fitting 33'' tyre thread.

Postby TOYZX on Wed, 02 Mar 2016 4:25 +0000

Definitely! You'll still be getting out the hammers tho!
User avatar
TOYZX
Moderator
 
Posts: 2919
Joined: Wed, 08 May 2013 7:58 +0000

Re: Fitting 33'' tyre thread.

Postby FAIL on Wed, 02 Mar 2016 4:54 +0000

Yeah that's all good. I was hoping to get away with the 305 as it's about 10mm lower in rolling diameter and I do a fair few kms and wanted to minimise the power loss.
User avatar
FAIL
 
Posts: 111
Joined: Fri, 23 Nov 2012 6:33 +0000
Location: Sunshine Coast

Re: Fitting 33'' tyre thread.

Postby FAIL on Thu, 03 Mar 2016 7:41 +0000

Also with the speedo error of 3.37%, would this also be the percentage of power lost through the larger tyres?
User avatar
FAIL
 
Posts: 111
Joined: Fri, 23 Nov 2012 6:33 +0000
Location: Sunshine Coast

Re: Fitting 33'' tyre thread.

Postby TOYZX on Thu, 03 Mar 2016 12:28 +0000

I wouldn't say it's that much but ya definitely notice when ya go to 33s.
User avatar
TOYZX
Moderator
 
Posts: 2919
Joined: Wed, 08 May 2013 7:58 +0000

Re: Fitting 33'' tyre thread.

Postby FAIL on Fri, 04 Mar 2016 8:12 +0000

Do you do much touring? Is there any regrets in going the 33"? We do a lot of km's with the camper and heaps of beach use so I just want to make sure I'm making the right decision.
User avatar
FAIL
 
Posts: 111
Joined: Fri, 23 Nov 2012 6:33 +0000
Location: Sunshine Coast

Re: Fitting 33'' tyre thread.

Postby fracturedranga on Fri, 04 Mar 2016 11:24 +0000

Fail of ypu change your diff gears to 4.11s your speedo will be bang on with the auto and 33's
User avatar
fracturedranga
 
Posts: 920
Joined: Fri, 12 Dec 2014 12:22 +0000
Location: dalby

Re: Fitting 33'' tyre thread.

Postby TOYZX on Fri, 04 Mar 2016 12:22 +0000

If ya doin big k's I'd definitely be doin ya diffs.
User avatar
TOYZX
Moderator
 
Posts: 2919
Joined: Wed, 08 May 2013 7:58 +0000

Re: Fitting 33'' tyre thread.

Postby FAIL on Sat, 05 Mar 2016 9:43 +0000

Yeah I will do in the future but for the time being is it going to give me the shits big time?
User avatar
FAIL
 
Posts: 111
Joined: Fri, 23 Nov 2012 6:33 +0000
Location: Sunshine Coast

Re: Fitting 33'' tyre thread.

Postby TOYZX on Sat, 05 Mar 2016 9:49 +0000

Nah I've been putting up with mine. Just Need to change ya driving a little, use a gear lower.
User avatar
TOYZX
Moderator
 
Posts: 2919
Joined: Wed, 08 May 2013 7:58 +0000

Re: Fitting 33'' tyre thread.

Postby FAIL on Sun, 06 Mar 2016 8:31 +0000

Trial fitted my buddy's 285/70/17 on FJ wheels and they went on easy so I'm sold.

Image

Image
User avatar
FAIL
 
Posts: 111
Joined: Fri, 23 Nov 2012 6:33 +0000
Location: Sunshine Coast

Re: Fitting 33'' tyre thread.

Postby mason92 on Mon, 14 Mar 2016 5:44 +0000

What everyone's thoughts on -10 mags with 285/75/16s, do the scrub much more and do they hang outside the flairs too much?
mason92
 
Posts: 10
Joined: Mon, 07 Jul 2014 4:59 +0000

Re: Fitting 33'' tyre thread.

Postby TOYZX on Mon, 14 Mar 2016 5:57 +0000

Depends on what brand of tyre ya get but yeah I reckon you'd get at least 40mm hangin out!
User avatar
TOYZX
Moderator
 
Posts: 2919
Joined: Wed, 08 May 2013 7:58 +0000

Re: Fitting 33'' tyre thread.

Postby mason92 on Wed, 16 Mar 2016 4:59 +0000

I think I will be going with the bfg ko2s, looks like I should make the effort to find some zero offset wheels.
mason92
 
Posts: 10
Joined: Mon, 07 Jul 2014 4:59 +0000

Re: Fitting 33'' tyre thread.

Postby TOYZX on Wed, 16 Mar 2016 3:21 +0000

Probably be the go. I'd have at least 20mm hanging out with zero offset.
User avatar
TOYZX
Moderator
 
Posts: 2919
Joined: Wed, 08 May 2013 7:58 +0000

PreviousNext

Return to Tyres & Wheels

Who is online

Users browsing this forum: No registered users and 26 guests