31/10.5r15 going to 265/75r16 with 2" lift

Need something to get you rolling?

31/10.5r15 going to 265/75r16 with 2" lift

Postby yeoy2 on Thu, 05 Nov 2015 10:42 +0000

G-day fellas
Im Running 31/10.5r15and looking at 265/75r16 on a 16 x 8 csa jackel +25 offset or a roh terrain + 10 offset. I've got 2 inch lift just wondering if I would have any problems
cheers in advance
yeoy2
 
Posts: 7
Joined: Wed, 04 Nov 2015 11:06 +0000
Location: jurin bay western australia


 

Re: 31/10.5r15 going to 265/75r16 with 2" lift

Postby lawrie89 on Thu, 05 Nov 2015 10:57 +0000

Dont forget to use the search function there are many threads already devoted to fitting this tyre size. That size tyre will fit fine, I have 265/70/r17 (same overall diameter as your 265/75/r16) on +30 offset and havent had any drama at all. Note the +10 rims may put your tyres just outside the guards however not 100% sure, the +25 offset is closer to the standard +30.
lawrie89
 
Posts: 18
Joined: Fri, 06 Jun 2014 6:04 +0000
Location: Darwin, NT

Re: 31/10.5r15 going to 265/75r16 with 2" lift

Postby knoxy on Thu, 05 Nov 2015 4:17 +0000

probably better off with +10, shouldn't have any issues with a good alignment.
09 Dual Cab SR: Stallion Tray | ARB Winch Bar | Warn 9500 Winch | Ultimate 3" lift| Narva Ultima 225 | Snorkel |MR Diff-Relocation | 32" BFG A/Ts +0 offset| Flares |
User avatar
knoxy
 
Posts: 197
Joined: Mon, 18 Nov 2013 5:32 +0000

Re: 31/10.5r15 going to 265/75r16 with 2" lift

Postby Guinea 68 on Thu, 05 Nov 2015 4:22 +0000

I'm running 265/75/16 on a CSA 16 x 8 Raptor wheel with +25 offset and a Ultimate Suspension 2inch lift, no rubbing anywhere, hope that helps.
Guinea 68
 
Posts: 8
Joined: Sun, 01 Apr 2012 4:24 +0000

Re: 31/10.5r15 going to 265/75r16 with 2" lift

Postby Rocket55 on Thu, 05 Nov 2015 5:23 +0000

Check out these 2 threads for starters

viewtopic.php?f=27&t=3264

viewtopic.php?f=27&t=11217
Cheers Rod
__________________________________________________________________________________________
Bitumen ...... another waste of public funds
User avatar
Rocket55
Moderator
 
Posts: 7816
Joined: Wed, 16 Mar 2011 8:07 +0000
Location: Sutherland NSW

Re: 31/10.5r15 going to 265/75r16 with 2" lift

Postby Mrmal on Fri, 06 Nov 2015 4:38 +0000

Also check the maximum height lift of suspension and tyres combined for your state - in Queensland it is 75mm so a two inch lift will allow up to 50mm lift in tyre diameter.... (as half the diameter does not contribute to body lift) without going to an engineering mod plate.
Mrmal
 
Posts: 194
Joined: Tue, 16 Jul 2013 11:26 +0000


Return to Tyres & Wheels

Who is online

Users browsing this forum: No registered users and 9 guests