Replacing rear wheel

[Carlhilux]

At the risk of sounding like a numpty, I can't get the rear wheel off to replace it. 2011 dual cab. The nuts are off but the wheel won't move because of a locking plate (not sure if that's the right term). I can't get this to move to get the wheel off.... Any advice would be great!!

[rory18]

I am a little confused, a locking plate on your rear wheels?

[dave g]

a photo will help

[DeadlyBeast]

Wheel rim prob slightly corroded and stuck to the hub face. If all nuts are off give it a good kick on the outer edge face of the tyre.

[Carlhilux]

Tried giving it a good whack but still no movement...will post pic in the morning....tools down because of all the rain...

[TOYZX]

I get this all the time when doin suspension on these things, as stated the rim will be a little corroded to the hub. I get a nice big bar in behind the wheel and used the leaf to pry off. Get someone to hold pressure on the bar and give the tyre a good thump with a sledgehammer(don't hit ya rim!) I even give em a spray with some panther piss and let it soak while I do the front end(bout an hour). Hope that helps, have fun.