NewHilux.net

Monster rides sell steel rims that fit the bigger brakes. Give them a buz.

Wazza80 wrote:Monster rides sell steel rims that fit the bigger brakes. Give them a buz.

Do you know if they are a 0 off set? Like I said I think a -13 will fit. But a 285 will rub.

Blkrota has them on his. 16x8 zero offset from memory

I have them on my hilux with 285s and yes they are a 0 offset from monster rides

16x8 +10 off set, caliper rubs on the hump.


16x8 Patrol, off a 1999 model, maybe a +10 off set. There seems to be a few styles of the Patrol rim over the year. The different is in the pattern of the vent holes.


6mm clearance.

I got a quote off Monster Rides for their rims and the want $230 each rim delivered from Qld to Syd. No deal......

A quick spray job last night for the spare to see how it looks.

aandy wrote:

Spidermonkey wrote:How the hell do I post a picture?????

viewtopic.php?f=83&t=7500

Cheers..

FYI guys! the brake calipers only changed late 2013/2014. you will find most 16s will fit fine i have a 2014 with 16s on it. dynamic sunraysias are good there centre is slightly different to other brands and they allow better clearance of the caliper. i would be very surprised if they didn't have a 16x8 that will fit straight on.

No, brake calipers on SR models fitted with VSC changed across the board to the larger ones around mid 2013 (single cab/extra cab) and end of 2013 (dual cab), SR5 models fitted with VSC changed in 2010 I think it was, whenever the model facelift came through that had the 17" wheels, the late 2011 facelift had all SR5 models equipped with the larger calipers and gave SR buyers the option with the safety pack for $1500. All other models run smaller brakes, the easiest way to spot it is factory fit 17" wheels.

Some 16" wheels fit the larger brakes, the patrol steelies, ROH terrain and a couple of others I can't remember off the top of my head.

If it's any help, I have 16x8 zero offset steel rims on my SR 2012. Have about 3mm clearance. They are pro comps, cost abit more but very happy with them.

dooma wrote:If it's any help, I have 16x8 zero offset steel rims on my SR 2012. Have about 3mm clearance. They are pro comps, cost abit more but very happy with them.

Didn't the SR have smaller callipers that year?

May be perhaps...I have 16x8 0 off set Geckho alloys on my May 2012 SR non VSC variant...but there aint much clearance
Nice nice looking rig Spider Monkey
Just might do the same exercise on mine.....very impressed

Richolux150 wrote:May be perhaps...I have 16x8 0 off set Geckho alloys on my May 2012 SR non VSC variant...but there aint much clearance
Nice nice looking rig Spider Monkey
Just might do the same exercise on mine.....very impressed

Cheers Richo, I love that little truck. Don't hesitate to ask me any questions.

Hi Guys,

I have a 2007 SR with a 3inch lift currently. I have purchased a second hand set of ROH impact wheels 16x8 with a -13 offset. Obviously I will have to fit some flares to the truck, but was wondering if anyone would know if these wheels would fit?

In regards to the wheel studs, they seem a little short for the stock nuts to go on, are there other nuts that I can get for these wheels if they do fit?

Any information on this would be greatly appreciated.

cheers.

Hey guys
In the process of selling my Lux its an 07 4x4 with
2 inch lift
Currently has un roadworthy cooper ST 265/75/16

Im getting some 265/75/16 of a GU Patrol with 0 offset
Will these be ok to chuck on?

Thanks offest really confuses me
(I cant remember what offset mine are at present as they were put on 3+ years ago)

I know the new 2015 SR hilux come standard with 17" wheels. Does that mean 16x8 with a zero offset won't fit?

Spidermonkey wrote:

Are they 285s/75s?

If they are do they rub on the upper control arm or anywhere?

I currently have Gecko 16x8 +15 offset with 285/75 and they slightly rub on upper control arm.

My brother has a set of the same patrol rims your running that I can have. Just wanna make sure it will make a difference.

i have 285 75 16's on patrol steelies on mine atm, apart from trimming the inner guard and body mount i have no clearance issues, im running MR's upper control arms but there is heaps of space anyway