Kluger alloys for HiLux 4x2?

Need something to get you rolling?

Kluger alloys for HiLux 4x2?

Postby Eddie on Thu, 22 May 2008 11:23 +0000

Hi Folks,

Would anybody know if 17" alloys from Kluger would fit to 4x2?

Kluger wheels are 17x 7.5" with 5 stud pattern (should fit :-) , shouldn't it? :-) )

Not sure about the offset.

Thanks for the info.

Cheers

Eddie
User avatar
Eddie
 
Posts: 16
Joined: Sun, 07 Jan 2007 12:00 +0000
Location: Kellyville Ridge, NSW


 

Kluger alloys for HiLux 4x2?

Postby ROLLUX on Thu, 22 May 2008 12:11 +0000

hilux sr5 are six stud not five bud not sure bout the 4x2
ROLLUX
 
Posts: 109
Joined: Fri, 18 Apr 2008 1:00 +0000
Location: mount isa, QLD

Kluger alloys for HiLux 4x2?

Postby Trini_hilux on Thu, 22 May 2008 3:29 +0000

The 4x4s are 6 stud while the 4x2s are 5 stud.
User avatar
Trini_hilux
 
Posts: 127
Joined: Mon, 07 Apr 2008 1:00 +0000
Location: , Not in OZ

Kluger alloys for HiLux 4x2?

Postby ROLLUX on Thu, 22 May 2008 6:32 +0000

nice wonder why they did that!!!! you can ring toyota or any tyre dealer and ask what the stud paturn is ie my misses mirage has a stud paturn or 4 x 100mm (100mm apart)
ROLLUX
 
Posts: 109
Joined: Fri, 18 Apr 2008 1:00 +0000
Location: mount isa, QLD

Kluger alloys for HiLux 4x2?

Postby McSumWay on Thu, 22 May 2008 8:59 +0000

The 4x2 has the same bolt pattern as the Falcon range. I reckon the new FG Falcon XR8 alloys would look great on them.
I have nothing good to say down here so I wont say anything at all
User avatar
McSumWay
 
Posts: 1333
Joined: Sun, 07 Jan 2007 12:00 +0000
Location: SW Sydney, Right Here on line

Kluger alloys for HiLux 4x2?

Postby camwill69 on Thu, 22 May 2008 9:32 +0000

From the info that I have they both run a PCD of 114.3mm. I just can,t seem to find the off-set.

Hope that helps.
Regards,
Camwill69
camwill69
 

Kluger alloys for HiLux 4x2?

Postby Glenn k on Fri, 23 May 2008 5:31 +0000

does anyone know if the kluger 19"alloy rim will fit on the 4x2 without any problems?
a mate of mine is looking to do this....
does anyone know where to get a a set cheap?
he lives in sydney
Glenn



due to recent financial difficulties, the light at the end of the tunnel has been shut off until further notice !
User avatar
Glenn k
 
Posts: 2006
Joined: Wed, 21 Mar 2007 1:00 +0000
Location: southern sydney, NSW

Re: Kluger alloys for HiLux 4x2?

Postby gibbit on Thu, 23 Apr 2015 6:59 +0000

I know this is an old thread but I had a lot of trouble finding out if they would fit and what they would look like.

Here's my 2006 SR.

Image
gibbit
 
Posts: 6
Joined: Mon, 23 Aug 2010 10:35 +0000

Re: Kluger alloys for HiLux 4x2?

Postby lverass on Mon, 11 May 2015 10:33 +0000

gibbit, can you tell me more about those wheels? Is the overall diameter bigger than the steelies? What tyres are you running?
lverass
 
Posts: 2
Joined: Mon, 11 May 2015 10:08 +0000
Location: Sydney

Re: Kluger alloys for HiLux 4x2?

Postby gibbit on Mon, 19 Oct 2015 1:29 +0000

lverass wrote:gibbit, can you tell me more about those wheels? Is the overall diameter bigger than the steelies? What tyres are you running?


Sorry for the very very late reply.

So they are 17inch kluger rims and tyres (straight off a Toyota Kluger). Which are 245 65 R17.

It puts the speedo out by 10% but gives it excellent fuel consumption on the hwy.
gibbit
 
Posts: 6
Joined: Mon, 23 Aug 2010 10:35 +0000


Return to Tyres & Wheels

Who is online

Users browsing this forum: No registered users and 6 guests