N80 brake upgrade

News and discussions related to the Hilux brand

N80 brake upgrade

Postby mccaw.d@gmail.com on Sun, 06 Oct 2019 1:55 +0000

Hi Guys,

Just completed a brake upgrade using 2015 Prado 150 calipers and rotors. Has to be the cheapest brake job I’ve ever done. The only mod required is to drill the Prado caliper mounts out from 12mm to 14mm. Everything aligned perfectly. Spent $150 on a set of calipers, $410 on a set of DBA T3 slotted rotors and $110 on a set of Ben Dix ultimates plus another $60 on having the holes drilled out by a fitter.

The N80 uses 319mm x 28mm rotors, the Prado uses 338mm x 32mm rotors. Tested is from 120km to dead stop and it saves about 15m over standard brakes. I would suggest a stiffer set of front springs and shocks as the nose really dives under heavy braking.

Dave
mccaw.d@gmail.com
 
Posts: 1
Joined: Wed, 06 Jul 2016 5:53 +0000
Location: Sydney


 

Re: N80 brake upgrade

Postby numberplate on Sun, 06 Oct 2019 3:13 +0000

well done mate
numberplate
 
Posts: 252
Joined: Mon, 10 Oct 2016 3:31 +0000
Location: QLD

Re: N80 brake upgrade

Postby HK1837 on Sun, 06 Oct 2019 7:04 +0000

120 ‘cruiser should fit too if 150’s are that easy. The only difference is 4mm in thickness. The only reason I didn’t fit these to my 2011 is I was told I needed to upgrade the master cyl to run the 150 series calipers. The 2016 on Hilux master cyl must be more suitable.
HK1837
 
Posts: 787
Joined: Tue, 17 May 2011 1:31 +0000


Return to Toyota News

Who is online

Users browsing this forum: No registered users and 1 guest