help!!! Removing Tub

[Parr]

Well going to pull the tub off my sr5 this weekend (getting a custom tray built. and i was just wondering if its as easy as it looks? the hardest part i can see is pulling the power for the fridge and lights.

any help regarding this would be fantastic

[troyco]

Hi mate, it is easy as. Just get all the electrics out of the way - the tray itself is childs play

Good luck
troyco

[Parr]

I was hoping that would be the case.

thanks troyco

[flyn_finn]

how much are you paying for the custom tray Parr? Also looking at going down the same path shortly.

[HOWHII]

Bumping this thread... About to pull my tub off (2006 sr) looks like 6 bolts but is there a loom to disconnect lights?

[KTM525EXC]

Bumping this thread... About to pull my tub off (2006 sr) looks like 6 bolts but is there a loom to disconnect lights?

Yeah there are a few plugs to disconnect, also don't forget to disconnect the fuel filler hose and breather.

Cheers Troy

[McSumWay]

Remove the taillights to unplug them. You will need to pull the rear loom out of the tub across the back before lifting.

[HOWHII]

Removed the tub, it was quite easy, for future reference...

Theres 6 Bolts, (if i remember rite 11/16)
You will need Ring Spanners, Socket Set & Ratchet and Ratchet Ring Spanners if you have...
Undo the 6 blots
The rear lights come out quite easy, 2 screws when you open the tail gate, then simply pull off... search you tube if you need a preview...
Then just undo the looms for lights, follow from the drivers side through to the passenger side.
The wiring just unclips (use pointy nose pliers)
Then just take off the Fuel release cable,

To make it easier remove plastic inner gaurds and mud gaurds

hope this helps...