seat belt beeper

seat belt beeper

Postby roly on Sat, 18 Nov 2006 9:32 +0000



yay!

i found out how to stop the car beeping if you dont put a seat belt on! tested it and it works.

also found out how to stop it beeping with the key in the ignition but i havent tested this bit yet
User avatar
roly
 
Posts: 106
Joined: Sun, 07 Jan 2007 12:00 +0000
Location: Hillside, VIC


 

seat belt beeper

Postby Pistolsen on Sun, 19 Nov 2006 6:42 +0000

tell us! please, the beeping is very anoying....
User avatar
Pistolsen
 
Posts: 17
Joined: Sun, 07 Jan 2007 12:00 +0000
Location: , Not in OZ

seat belt beeper

Postby badboymatt on Sun, 19 Nov 2006 4:17 +0000

well you gonna share with us??????
User avatar
badboymatt
 
Posts: 132
Joined: Sun, 07 Jan 2007 12:00 +0000
Location: WELLINGTON, NZ

seat belt beeper

Postby ufc on Mon, 20 Nov 2006 4:53 +0000

I will post how to do it tomorrow. There is a few things you got to do is a specific order. Its easy though. I found it on the net ages ago.
ufc
 
Posts: 19
Joined: Sun, 07 Jan 2007 12:00 +0000
Location: ballarat, VIC

seat belt beeper

Postby roly on Mon, 20 Nov 2006 8:31 +0000

(1)turn the car on , do not start engine(leave you foot off the
brake).cycle your trip reset knob until you it reads odo. turn the
ignition back off. wait a couple of seconds

(2) make sure seat belt is not fastened

(3)turn the ignition back on ,do not start the car(leave your foot off
the brake) as soon as you see everything light up, press and hold the
trip reset knob and do a long 12 second count.

(4)keep your finger on the trip reset knob. fasten your seat belt, as
soon as you fasten your seat belt, you should see the odo display go
from xxxx ks to "b-on". at that time take your finger off the trip
reset
knob and press it again. it should cycle to "b-off". you should be all
set turn the ignition off and unfasten your seat belt.
User avatar
roly
 
Posts: 106
Joined: Sun, 07 Jan 2007 12:00 +0000
Location: Hillside, VIC

seat belt beeper

Postby Dave on Mon, 20 Nov 2006 9:18 +0000

Haha where'd you find that roly? cheers mate.. legend
User avatar
Dave
Site Admin
 
Posts: 3183
Joined: Sun, 07 Jan 2007 12:00 +0000
Location: Perth, WA

seat belt beeper

Postby roly on Tue, 21 Nov 2006 3:11 +0000

on the net, but i have a non beepy hilux now

the key in ignition was the worst
User avatar
roly
 
Posts: 106
Joined: Sun, 07 Jan 2007 12:00 +0000
Location: Hillside, VIC

seat belt beeper

Postby StoneySR05 on Tue, 21 Nov 2006 3:21 +0000

Excellent - Worked a treat I will to the ignition tomorrow 8-) 8-)
User avatar
StoneySR05
 
Posts: 219
Joined: Sun, 07 Jan 2007 12:00 +0000
Location: Woronora Heights, NSW

Re: seat belt beeper

Postby Moony on Wed, 20 Aug 2008 12:20 +0000

How sweet it is, no endless seat belt noise, cheers Roly :)
Moony
 
Posts: 2
Joined: Wed, 20 Aug 2008 11:20 +0000

Re: seat belt beeper

Postby tonys on Wed, 10 Sep 2008 4:32 +0000

What a great site this is, it works on UK spec luxes as well,thank god.

Cheers.
tonys
 
Posts: 49
Joined: Thu, 28 Aug 2008 2:10 +0000

Re: seat belt beeper

Postby Chill on Sun, 14 Sep 2008 1:51 +0000

Still working on a July '08 build!
Chill
 
Posts: 3
Joined: Wed, 19 Mar 2008 1:00 +0000
Location: FNQ, QLD

Re: seat belt beeper

Postby ashy on Sun, 14 Sep 2008 4:02 +0000

Just unplug the doover under the seat, jeez it aint that hard. To stop all the other buzzers, such as headlights, and door ajar pull the plug to the interior lights in the drivers side door jamb, it means that when you open yor drivers door a night you can't see, but who cares. Just reach up to the interior light and switch it on if you are scared of the dark.

Ashy
ashy
 
Posts: 104
Joined: Tue, 04 Dec 2007 2:00 +0000
Location: Watsonia, VIC

Re: seat belt beeper

Postby Falky on Sat, 20 Sep 2008 11:52 +0000

G'day all
new to site and found it great

thanks to roly I have no annoying beeping sounds now when the seat belt isn't plugged in

cheers Adam
User avatar
Falky
 
Posts: 4
Joined: Thu, 18 Sep 2008 7:54 +0000
Location: Sth Aust

Re: seat belt beeper

Postby willey on Fri, 08 Apr 2011 8:18 +0000

turn on ignition to guages jump, hold in odo button for 20secs and then plug in seatbelt, b-on will show up in the odometer push button again b-off will show. that's it.
willey
 
Posts: 1
Joined: Fri, 08 Apr 2011 7:56 +0000

seat belt beeper

Postby TrentRyan on Fri, 08 Apr 2011 9:48 +0000

Worked a treat. My mates appreciated the tip as well
User avatar
TrentRyan
 
Posts: 121
Joined: Wed, 25 Aug 2010 12:49 +0000

seat belt beeper

Postby trout_86 on Fri, 08 Apr 2011 7:16 +0000

Sounds easier just to unplug it out of the ignition ay
User avatar
trout_86
 
Posts: 93
Joined: Sat, 12 Mar 2011 7:46 +0000

Re: seat belt beeper

Postby Steve9R on Sun, 26 Jun 2011 6:06 +0000

ohh dear.. here's another way to do it... :roll:

http://cgi.ebay.com/ebaymotors/Car-Vehi ... ccessories
User avatar
Steve9R
Valued Contributor
 
Posts: 5248
Joined: Wed, 11 Apr 2007 1:00 +0000
Location: Melbourne, VIC

Re: seat belt beeper

Postby aandy on Tue, 20 Sep 2011 2:20 +0000

FYI still works on 2011 updated sr5
User avatar
aandy
 
Posts: 951
Joined: Sat, 07 May 2011 3:35 +0000
Location: Bali

Re: seat belt beeper

Postby impulsive on Sat, 01 Sep 2012 10:08 +0000

Hi All
Am trying what you say to get rid of beeper sound, but it's not happening for me.
When I press odo nothing happens until I take my finger off, then it just changes from odo to trip A!
Help!!!
impulsive
 
Posts: 2
Joined: Thu, 30 Aug 2012 6:54 +0000

Re: seat belt beeper

Postby Toylux4 on Sat, 01 Sep 2012 4:38 +0000

Just did it worked a treat, thanks roly

Sent from my iPad using Tapatalk HD
User avatar
Toylux4
 
Posts: 221
Joined: Sun, 22 May 2011 7:26 +0000
Location: Northdown Tas

Next

Return to Tips & Tricks

Who is online

Users browsing this forum: No registered users and 17 guests