How to REMOVE the EXTRA CAB back seat

[llough10]

Hi All!

Just wondering if anyone has removed the back rest panel off the Extra Cab back-seat?

[Bushbound]

Its not hard, I've copied the pages out of the manual but the pictures didn't copy across.
PM me if this isn't enough info and I'll give you some more tips.
Geoff

REMOVE BACK PANEL GARNISH UPPER
B086203E01
Using a screwdriver, detach the 4 claws at the top behind the back rest panel.

HINT: Tape the screwdriver tip before use.
Using a clip remover, detach the 5 clips at the bottom and remove the garnish.

4. REMOVE BACK PANEL GARNISH LOWER
B085704E01
Using a screwdriver, detach the 6 claws.

HINT: Tape the screwdriver tip before use.

Using a clip remover, detach the 5 clips and remove the garnish.
5. REMOVE REAR SEATBACK ASSEMBLY
B085703E01
Remove the 2 bolts.
Lift up the seatback in the direction indicated by the arrow in the illustration to detach the 2 hooks from the vehicle body. Then remove the seatback.

NOTICE:

Be careful not to damage the vehicle body.