How to clean your map sensor filter

Re: How to clean your map sensor filter

Postby Talktheroo on Sun, 24 Jan 2016 5:10 +0000

Yep, helps get the correct boost back.
The Roo.
Passing through country and seeing country are two different things.
User avatar
Talktheroo
 
Posts: 1204
Joined: Sun, 24 Feb 2013 12:45 +0000
Location: Brisbane.


 

Re: How to clean your map sensor filter

Postby bjbarsted on Sun, 21 Feb 2016 8:04 +0000

Just looking through the thread and I have been trying to find one on a maf sensor clean but can't find any thing
Is it a simple job if so where do I find it
Any help would be good thx
bjbarsted
 
Posts: 20
Joined: Mon, 31 Aug 2015 5:05 +0000
Location: Berwick, vic

Re: How to clean your map sensor filter

Postby DeadlyBeast on Mon, 22 Feb 2016 6:19 +0000

Try a little harder, look through this thread again
________________________
2007 SR5 D4D Auto
2014 SR D4D Auto
Build Thread
DeadlyBeast
Moderator
 
Posts: 1914
Joined: Sat, 26 May 2012 7:42 +0000
Location: Top End

Re: How to clean your map sensor filter

Postby matan on Mon, 22 Feb 2016 7:15 +0000

I wonder if the map sensot filter could be the cause of my problem. My 05 sr5 goes into the engine control mode when i rev hard in third gear. When towing a boat if i accelerate to join traffic on the. Highway i get the engine icon and cannot get over about 78 keep lometers speed. I disconnect th battery, reconnect a few minutes later and all is good until the next time it happens. Whats the cause
matan
 
Posts: 15
Joined: Tue, 11 Mar 2014 9:24 +0000

Re: How to clean your map sensor filter

Postby Schwanm on Mon, 28 Mar 2016 3:36 +0000

Did this yesterday.. Heaps of oil and gunk came out.. So much more power now :-D
Schwanm
 
Posts: 51
Joined: Sun, 10 Feb 2013 3:24 +0000

Re: How to clean your map sensor filter

Postby Luxxy2005 on Tue, 05 Jul 2016 3:53 +0000

Where do I buy a new one? Mines completely cracked and leaking
Luxxy2005
 
Posts: 27
Joined: Tue, 10 May 2016 9:36 +0000
Location: Townsville QLD

Re: How to clean your map sensor filter

Postby Josh Walker on Wed, 06 Jul 2016 5:30 +0000

Where can you get replacement ones from ?
Josh Walker
 
Posts: 1
Joined: Sun, 15 May 2016 4:27 +0000
Location: Melbourne

Re: How to clean your map sensor filter

Postby fubar on Thu, 07 Jul 2016 5:06 +0000

Your local toyota store / workshop
fubar
 
Posts: 107
Joined: Wed, 09 Dec 2009 8:15 +0000

Re: How to clean your map sensor filter

Postby Dutchman_1986 on Thu, 07 Jul 2016 5:10 +0000

Checked my one on a 2005 model and was clean, when I removed the intercooler there was a fair bit of oil inside is this normal
Dutchman_1986
 
Posts: 1
Joined: Sat, 02 Jul 2016 7:39 +0000
Location: Bullsbrook WA

Re: How to clean your map sensor filter

Postby adzylux on Thu, 08 Sep 2016 1:09 +0000

Cheers for the info Boxhead!

Did this on my 2011 D4D Hilux and the their was a fair bit of gunk that came out. Similar to those that have posted pics.

I have a catch can that I'm overdue to install. Maybe I get onto this sooner rather than later eh?

Car does feel a bit pokier onto boost. Looking forward to monitoring my next tank of fuel to see if I'm getting better enconomy!

Thanks again, Boxhead, and to everyone else that posted useful info on this thread :D
adzylux
 
Posts: 6
Joined: Mon, 28 Sep 2015 2:21 +0000
Location: New South Wales

Re: How to clean your map sensor filter

Postby Magnum06 on Mon, 13 Feb 2017 8:45 +0000

Does the actual MAP Sensor itself need cleaning? Not the MAF where the air cleaner is, but the sensor on the intercooler? It has a small hose going directly to the MAP sensor filter.
Magnum06
 
Posts: 55
Joined: Sat, 02 Jan 2016 2:12 +0000
Location: Darwin, NT

Re: How to clean your map sensor filter

Postby TOYZX on Mon, 13 Feb 2017 12:31 +0000

Go back thru this thread and you find pics of what need cleaning. The map sensor has its own little filter.

Sent from my SM-N920I using Tapatalk
User avatar
TOYZX
Moderator
 
Posts: 2919
Joined: Wed, 08 May 2013 7:58 +0000

Re: How to clean your map sensor filter

Postby Muddy Dazza on Tue, 07 Mar 2017 6:07 +0000

Purchased a new MAP filter last week, but will wait until I fit the catch can before replacing it. $50 for a new filter it is easier to change it out.
Thanks to this thread, I never knew about this filter before.
Muddy Dazza
 
Posts: 16
Joined: Sun, 08 Mar 2015 3:52 +0000
Location: Sutherland, NSW

Re: How to clean your map sensor filter

Postby Fake News Outlet on Sun, 09 Jul 2017 11:25 +0000

I want to give these 2 parts a clean, can anyone recommend how long it might take to air dry the sensor and filter? If there was any residual moisture would it be a problem?
User avatar
Fake News Outlet
 
Posts: 8
Joined: Wed, 05 Jul 2017 5:49 +0000
Location: Sydney, NSW

Re: How to clean your map sensor filter

Postby TOYZX on Sun, 09 Jul 2017 12:49 +0000

I just blow through mine (breath) have seen then damaged by compressors. If ya use o2 sensor cleaner it'll evaporate in a few minutes.

Sent from my SM-G955F using Tapatalk
User avatar
TOYZX
Moderator
 
Posts: 2919
Joined: Wed, 08 May 2013 7:58 +0000

Re: How to clean your map sensor filter

Postby iller on Sun, 23 Jul 2017 4:30 +0000

So i just cleaned the sensor and filter but both seemed clean, but when i run techstream it still says there is to low pressure on it. Any ideas?
iller
 
Posts: 183
Joined: Mon, 02 Jan 2017 11:55 +0000
Location: Sweden

Re: How to clean your map sensor filter

Postby Sam Gribley on Mon, 19 Feb 2018 10:56 +0000

Cleaned both yesterday and even for somebody who is only an apprentice backyard mechanic so far, it was easy and only took 5 minutes. 2010 SR with a little over 200k on the clock and pure filth came out of both the sensor and the filter, definitely a noticeable difference in drive afterwards too.

Big thanks to boxhead (original poster) for pointing this out because I would never have known about it otherwise.
Sam Gribley
 
Posts: 76
Joined: Sun, 10 Sep 2017 2:44 +0000
Location: Tasmania

Re: How to clean your map sensor filter

Postby wombat81 on Sun, 04 Mar 2018 6:25 +0000

I cleaned my MAP filter today. It didn't seem as dirty as others on the thread. I got some sooty stuff out of it, but not heaps, and nothing oily like others have said. I thought it'd be worse since it's an ex-miner with 180k on the clock. Thanks for the info, though. It's something I'll do regularly now.
Current: 2021 SR Dual Cab Chassis 4x4 2.8TD Manual
Retired: 2010 SR Dual Cab Chassis 4x4 3.0TD Manual
My current (2021 model) build thread
My previous (2010 model) build thread
User avatar
wombat81
 
Posts: 225
Joined: Sun, 31 May 2015 10:27 +0000
Location: Townsville

Re: How to clean your map sensor filter

Postby Tazlar on Sun, 12 Aug 2018 8:39 +0000

Just read this whole thread and went to clean mine.... aah.. do I have one? Haha

Do not all hilux’s look like the one in the pics on the first page? I’m still trying to figure out how to put up a pic of mine
User avatar
Tazlar
 
Posts: 14
Joined: Sat, 14 Jul 2012 6:44 +0000
Location: NT

Re: How to clean your map sensor filter

Postby Tazlar on Sun, 12 Aug 2018 9:01 +0000

User avatar
Tazlar
 
Posts: 14
Joined: Sat, 14 Jul 2012 6:44 +0000
Location: NT

PreviousNext

Return to Tips & Tricks

Who is online

Users browsing this forum: No registered users and 3 guests