Building Brush bars?

[kyle300exc]

I am looking at building a set of brush bars. Will post some pics of how I go unless its a fail
Looking for suggestions on weather to use a pipe bender or whether to weld in some bends.
Also if anyone has made them and knows the angles used.

Thanks

[07luxyTD]

I had a go at building my own with a bender and wouldnt recommend bender if to do it again. Cut and weld is the go. When you have to bend away from the cab and up is the part that bugged me very fidly to get them the same. Also unless you have a high wall mandrels to sit in the bender its gonna distort the pipe outta shape pre well on the top bend almost 90 degrees. Have A look in utedogs build he just finished his off. Mine never got finished i ended up cutting the bars off and finishing the steps tho there still sitting in the shed
Clamps are about $45 from ARB to suit their bar



Cheers ross

[kyle300exc]

[/quote]

Pictures of Scottmans custom made sliders on ARB brush bars.
Had a set of ARB brush bars dropped off today to have a look at and get some angles off, thanks Matt.

[kyle300exc]

End results: dont waste your time just buy them $300 at ARB

[ScotsMan]

lol

[07luxyTD]

100% agree ^^^ not worth buggering around if you already have the steps

[smithy01]

So you can buy just the scrub bars from arb? Without the step?

[kyle300exc]

Yes

[smithy01]

Hm might need to give them a call I think. Making the sliders and steps wasn't such a problem, but the bars were. Thanks for that mate

[wainui123]

If you are keen you can change my side steps to suit the lift? I will bring burbon for you??

[kyle300exc]

You'll have to wait till I get my sliders done first then we can negotiate

[wainui123]

You'll have to wait till I get my sliders done first then we can negotiate

lol. How about talking to young Matt he has been making up sliders or just modify your ARB ones (buy brush bars) you can always strenghten them?(I know where you can get bars).

[kyle300exc]

I had a look at Matts ones, good effort but I want a better mounting set up, much like the guys have built on here. Need to incorporate the brush bar into the making of it so it all lines up. ATM Ive got so much going on I dont know when Ill get to look at it.