NewHilux.net

Has any one been able to find the relay I can't find anything on eBay for them, and i have also look at jaycar and still nothing could you give me a hand

couple of search terms to search for then..

'AP6221', 'DPDT 20A'

Here's one..

http://www.ebay.com.au/itm/NTE-R55-11D2 ... 3cce2ba49e

Steve

Awesome mod Steve If my missus ran 2 of my batteries flat I probably would have put a massive amp in the alarm circuit for leaving your lights on and then hooked it up to a building alarm siren just to ensure it got her attention . Although your way is provably better for the relationship

I think you can also search for a 30a 12v dpdt relay. Looks like they are more common than the 20 amp and cheaper. Make sure its a worldwide search. Searching item description and title might help also.
Can someone confirm please?

Yeah.. and honestly.. im still running the original 10A in my truck (cause ive been lazy and havent changed it since i first did the mod).. and even with the extra loads of trailers / caravans etc Ive never had a problem.. and im globes all over no LEDs.. but as stated the 'potential' for failure is still there.. so its safer to go 20A+

Steve

Can someone confirm if this will work for this mod

http://item.mobileweb.ebay.com.au/viewi ... 0824101962

yeah that'd work.. but its HUGE by the looks of it..

http://www.ebay.com.au/itm/JQX-30F-2Z-H ... 2577c7b065

that one looks smaller.. not bad prices now compared to when i wrote this mod..

Steve

Thanks. Orded and paid for now just to wait for it and give the mod a crack

I just completed this mod thanks to steve9r.

for those who don't wanna buy a special relay & have 2 regular 5 pin relays kicking around can be wired like such
I taped the 2 relays together.
green plug end to 86 on relay1
green harness end to 87 on relay1.
join both 86 terminals onto 1 wire that taps into the blue red trace ignition wire.
I joined 85 on relay 1 onto 1 of the 87 on relay2.
other 87 on relay2 jumped to85 on relay2 which then connects to black on harness side.
black on plug side goes to 30 on relay2. have tested now to tape up n put together.

Great mod steve, I've been looking for my next mini project

Great mod

hi guys, i gotta do this mod, i have just done a search on ebay for the realay and I can only find 2 and one works out $60 delivered and the other $80 delivered, and also been to jaycar and they dont have any
does anybody have a link to these for ebay?
thanks

have a look at my version above can be done with 2 regular relays that will cost around 20 bucks

I know it was mentioned we can use a 30a relay, is this the correct one? Will this work?

http://www.ebay.com.au/itm/200859575165 ... 26_rdc%3D1

Thanks

No that's Not same as I used. I used a normal 30 amp relay like you would use for driving lights etc.http://m.ebay.com.au/itm/400205422029?nav=SEARCH

Should do

ok cool, thanks guys

absolutely .. that 12v 30amp bosch relay posted by evl253

http://www.ebay.com.au/itm/400205422029

will work perfectly..

Steve

Any chance of pin# and order for the above relay?

Cheers,
Paul

swear people don't know how to read or look at the pictures above first.