Ended up using a relay. The stock wires are piddly as. Went with the sebel magnum 2. Not overly loud. Just a better tone than stock. I kept both horns for now
Installed a set of shocker xl's from hornblasters under the bed of the truck. Crazy loud. Tested a set of kleinn 230's which cant compare at all to the sound and loudness of the shockers.
Fitted the Stebel Nautilis compact with a wiring loom. I also left my stock SR5 horns in place and only disconnected the RHS one to trigger it. This way, a light 'toot' initially gives a friendly beep. Hang onto the horn and the Sebel bellows nicley. Great mod.
flip9 wrote:Anyone know how many amps the the stock horn wiring/fuse can do?
Im thinking of getting hella super tones (2x 66w) and using the stock cables.
I don't have my car with me to check but you looking at around 10amps @ 13v (averaged). I would assume they run a 10amp fuse in that circuit so you'll need a battery feed and relay. If 15 your all good
The horn fuse is indeed 10A, so i ended up going with the Sharptones so i can use the stock wiring. I just repainted the cowl red because yellow was a little too striking.