Re: Fitting outback roof console
Posted: Sun, 08 Jun 2014 7:08 +0000read the paper work and check wot you have done and make shore you have not jammed any wires
I like pictures
Page 2 of 2
Posted: Sun, 08 Jun 2014 7:08 +0000Re: Fitting outback roof console
Posted: Sun, 08 Jun 2014 7:20 +0000Where are the pictures !!
I like pictures
I like pictures
Re: Fitting outback roof console
Posted: Mon, 24 Aug 2015 10:57 +0000Hey guys. I recently had one of these bad boys installed. I have noticed that the sunvisor hits the radio cord holder. It was installed by a 3rd party who tell me this is normal. Can anybody else confirm this?
Re: Fitting outback roof console
Posted: Mon, 24 Aug 2015 6:38 +0000the cord holder is in the wrong place.
I have 2 fitted 1 each side with no contact at all and no cord hanging down
I have 2 fitted 1 each side with no contact at all and no cord hanging down
Re: Fitting outback roof console
Posted: Mon, 24 Aug 2015 9:56 +0000Fitted one of these at work today. Whoever fitted it has put the cord holder in a bad spot. There isn't an actual marked spot for it, ya just drill and self tapper it on wherever you want, it even tells you in the instructions to check the sun visor movement before screwing it on.
Re: Fitting outback roof console
Posted: Thu, 25 Feb 2016 1:58 +0000Hey guys
Ive put one in my 14 hilux dc but my lights dont go out on the timer any more..any ideas?
Ive put one in my 14 hilux dc but my lights dont go out on the timer any more..any ideas?