Factory Reverse Camera Guidelines (Line Diag Menu)

Re: Factory Reverse Camera Guidelines (Line Diag Menu)

Postby boxhead55 on Mon, 19 May 2014 11:08 +0000

V19 is the current map
User avatar
boxhead55
 
Posts: 2864
Joined: Sat, 15 Jun 2013 3:46 +0000


 

Re: Factory Reverse Camera Guidelines (Line Diag Menu)

Postby boxhead55 on Mon, 19 May 2014 11:10 +0000

The Gide lines comes on by a 1.2k ohm resister in the earth line of the camera wiring. A far bit of mucking around to get to happen. Some work some don't. Resistor value may be more or less. But does work
User avatar
boxhead55
 
Posts: 2864
Joined: Sat, 15 Jun 2013 3:46 +0000

Re: Factory Reverse Camera Guidelines (Line Diag Menu)

Postby miccos on Mon, 19 May 2014 11:20 +0000

Thanks Boxhead,

just to clarify, you stated earlier that the 2014 head unit is a software update? As I have the 2014 head unit.

Sorry to be a pain, 6 day old Hilux. Excitement is still high
User avatar
miccos
 
Posts: 71
Joined: Wed, 29 May 2013 9:20 +0000
Location: North Brisbane

Re: Factory Reverse Camera Guidelines (Line Diag Menu)

Postby boxhead55 on Mon, 19 May 2014 1:06 +0000

It was to solve a gps drop out issue. If you require it your service department will advise you of it.
User avatar
boxhead55
 
Posts: 2864
Joined: Sat, 15 Jun 2013 3:46 +0000

Re: Factory Reverse Camera Guidelines (Line Diag Menu)

Postby William_Foster on Mon, 19 May 2014 5:46 +0000

boxhead55 wrote:The Gide lines comes on by a 1.2k ohm resister in the earth line of the camera wiring. A far bit of mucking around to get to happen. Some work some don't. Resistor value may be more or less. But does work


Any chance of a write-up with photos Boxhead?
2013 Toyota Hilux SR5
4x4 Manual Diesel
User avatar
William_Foster
 
Posts: 248
Joined: Sat, 11 Jan 2014 3:58 +0000
Location: Northern Territory

Previous

Return to Tips & Tricks

Who is online

Users browsing this forum: No registered users and 2 guests