Fitting genuine Rugged bull bar to 2018 SR5?

Fitting genuine Rugged bull bar to 2018 SR5?

Postby SO PHAT on Tue, 01 Mar 2022 5:23 +0000

Hi all, I have purchased a Rugged x bull bar and was wondering if anyone has fitted to an SR5. I have all the parts etc just can’t find any instructions anywhere for install. Any help would be appreciated thank you
SO PHAT
 
Posts: 3
Joined: Thu, 20 Jan 2022 4:57 +0000
Location: Gold Coast


 

Re: Fitting genuine Rugged bull bar to 2018 SR5?

Postby Bushwalker8 on Tue, 01 Mar 2022 7:25 +0000

This won't help with any plastic surgery or anything else important and you probably don't have the winch, however there are at least some details in the Rugged X winch fitting kit instructions that also describe how to remove and refit the bar inc brackets, mounting points, bolts, torque etc.

Head here https://toyotamanuals.com.au/accessories and search for PZQ2989470

Not sure you will find instructions for a factory fitted item but if you do magically encounter a relevant PZQ number you could maybe coax out of spare parts, throw it in there also and see what turns up.

Good luck
Bushwalker8
 
Posts: 169
Joined: Fri, 02 Sep 2016 6:59 +0000
Location: Geelong, Victoria

Re: Fitting genuine Rugged bull bar to 2018 SR5?

Postby SO PHAT on Tue, 01 Mar 2022 7:42 +0000

Thanks mate, that does give me a bit of a better idea what goes where and what bolts are used where. I did try hitting up spare parts but they were not help at all unfortunately.
SO PHAT
 
Posts: 3
Joined: Thu, 20 Jan 2022 4:57 +0000
Location: Gold Coast

Re: Fitting genuine Rugged bull bar to 2018 SR5?

Postby Bushwalker8 on Wed, 02 Mar 2022 12:44 +0000

There could also be a mounting dependency on the OEM front recovery points if you haven't already got them: PZQ5089650

And as an example only, this will give you some idea what's involved installing the OEM premium steel bullbar. I have no idea what all the differences are so don't take anything here as gospel but it could also help to figure out what it is you need to track down such as the templates etc: PZQ2989282
Bushwalker8
 
Posts: 169
Joined: Fri, 02 Sep 2016 6:59 +0000
Location: Geelong, Victoria

Re: Fitting genuine Rugged bull bar to 2018 SR5?

Postby speedster1930 on Tue, 10 Oct 2023 7:33 +0000

I too, am considering fitting a Rugged X Bull Bar to an SR5. How successful was your attempt to do so?
speedster1930
 
Posts: 2
Joined: Tue, 10 Oct 2023 7:09 +0000
Location: Toowoomba Qld


Return to Exterior Mods

Who is online

Users browsing this forum: No registered users and 3 guests