Gen 8 Genuine Toyota Bullbar Winch Fitting
Posted: Wed, 08 Feb 2017 12:32 +0000
After much searching on the net couldn't find any picutres in regards to fitting a winch to a genuine Toyota bull bar.
Thought Id upload some pictures of a Runva Winch fitted to a genuine Toyota bull bar to give anyone ideas on what it looks like or where to mount the winch solenoid. Big thanks to Brendan and his team at Ultimate Suspension who fitted the winch when my Hilux was getting a lift.
Winch Solenoid was attached using the original bracket bent into place.
Winch clutch is easily accessed with the Toyota spring kit which replaces the original mesh and leaves a hole to stick your hand through.
The winch battery isolator was mount on to of the fuse box
Just a note if you have the bull bar already on without the winch cradle the whole bull bar will need to be removed.
Thought Id upload some pictures of a Runva Winch fitted to a genuine Toyota bull bar to give anyone ideas on what it looks like or where to mount the winch solenoid. Big thanks to Brendan and his team at Ultimate Suspension who fitted the winch when my Hilux was getting a lift.
Winch Solenoid was attached using the original bracket bent into place.
Winch clutch is easily accessed with the Toyota spring kit which replaces the original mesh and leaves a hole to stick your hand through.
The winch battery isolator was mount on to of the fuse box
Just a note if you have the bull bar already on without the winch cradle the whole bull bar will need to be removed.