Gen 8 Genuine Toyota Bullbar Winch Fitting

Gen 8 Genuine Toyota Bullbar Winch Fitting

Postby benji0805 on Wed, 08 Feb 2017 12:32 +0000

After much searching on the net couldn't find any picutres in regards to fitting a winch to a genuine Toyota bull bar.

Thought Id upload some pictures of a Runva Winch fitted to a genuine Toyota bull bar to give anyone ideas on what it looks like or where to mount the winch solenoid. Big thanks to Brendan and his team at Ultimate Suspension who fitted the winch when my Hilux was getting a lift.

Image

Winch Solenoid was attached using the original bracket bent into place.

Image

Winch clutch is easily accessed with the Toyota spring kit which replaces the original mesh and leaves a hole to stick your hand through.

Image

The winch battery isolator was mount on to of the fuse box

Image

Just a note if you have the bull bar already on without the winch cradle the whole bull bar will need to be removed.
benji0805
 
Posts: 9
Joined: Tue, 09 Feb 2016 9:50 +0000
Location: Campbelltown NSW


 

Re: Gen 8 Genuine Toyota Bullbar Winch Fitting

Postby adamkberger on Sat, 11 Feb 2017 11:12 +0000

Did you use the genuine winch cradle and fitting kit?
2015 SR5 2.8 Dual Cab Hilux
User avatar
adamkberger
 
Posts: 357
Joined: Thu, 25 Apr 2013 5:30 +0000
Location: Melton, Victoria

Re: Gen 8 Genuine Toyota Bullbar Winch Fitting

Postby benji0805 on Wed, 15 Feb 2017 4:18 +0000

Yes
benji0805
 
Posts: 9
Joined: Tue, 09 Feb 2016 9:50 +0000
Location: Campbelltown NSW

Re: Gen 8 Genuine Toyota Bullbar Winch Fitting

Postby Ozwaz on Fri, 17 Feb 2017 1:07 +0000

How much did the kit cost mate?
Ozwaz
 
Posts: 115
Joined: Mon, 27 Jun 2016 8:17 +0000
Location: Rossville FNQ

Re: Gen 8 Genuine Toyota Bullbar Winch Fitting

Postby benji0805 on Sun, 19 Feb 2017 11:49 +0000

From memory around the $480 mark
benji0805
 
Posts: 9
Joined: Tue, 09 Feb 2016 9:50 +0000
Location: Campbelltown NSW

Re: Gen 8 Genuine Toyota Bullbar Winch Fitting

Postby baulchie on Wed, 15 Mar 2017 9:51 +0000

Hi benji0805,
I know you can get the winch cradle separate but can you order the fitting kit separate as well, or does that come with the cradle?
Cheers
baulchie
 
Posts: 1
Joined: Sun, 04 Sep 2016 11:49 +0000
Location: Victoria

Re: Gen 8 Genuine Toyota Bullbar Winch Fitting

Postby benji0805 on Wed, 15 Mar 2017 8:13 +0000

Im pretty sure you can purchase separately if required
benji0805
 
Posts: 9
Joined: Tue, 09 Feb 2016 9:50 +0000
Location: Campbelltown NSW

Re: Gen 8 Genuine Toyota Bullbar Winch Fitting

Postby adamkberger on Fri, 17 Mar 2017 3:53 +0000

PZQ2989290 Winch Cradle
PZQ29892WK Steel Bullbar Winch Fitting Kit
2015 SR5 2.8 Dual Cab Hilux
User avatar
adamkberger
 
Posts: 357
Joined: Thu, 25 Apr 2013 5:30 +0000
Location: Melton, Victoria

Re: Gen 8 Genuine Toyota Bullbar Winch Fitting

Postby Leroyangus on Thu, 05 Jul 2018 8:43 +0000

Hi adamkberger,
To fit the runva was the winch cradle modified at all as it’s not a Warn winch? I’ve heard the cradle is suited to a Warn only, though that was an opinion.

Thanks
2016 SR Extra Cab
User avatar
Leroyangus
 
Posts: 8
Joined: Sat, 20 Dec 2014 5:30 +0000
Location: New zealand


Return to Exterior Mods

Who is online

Users browsing this forum: No registered users and 3 guests