judge520 wrote:Roadafe do recovery points that apparently fir with the Toyota bar.
They do and the points themselves are well made but a lot of other issues fitting.
The instructions and parts fitment for the OEM bar are incorrect, and they are now supplying an updated Version 2 of the recovery points but not have updated the instructions for this either.
There is some extra drilling and machining of the OEM bar hardware required and some of the supplied bolts are also too short for an OEM installation and other bits such as washers are inferior quality and bend into the holes before the recommended torque is reached.
Best to re-use as many of the OEM Totota bolts and stronger washers as possible if you go this route and allow time for messing around and shopping for more hardware midstream.