Specialist 4x4 Suspension / Wheel Alignment Places Northwest

[JP106]

Hi guys

My current situation

2.5ish inch fox suspension lift all round. Cal offroad adjustable UCAs. I am running 285/7017 KM2s 0 offset king d holes.

Have been to bob jane twice but they can't seem to get the alignment right without scrubbing.

I have trimmed inner guard.

My question is do you know of anywhere in Northwest Sydney that specialise in 4x4 suspension / wheel alignments? Ideally i can take it to a place where they know how to adjust caster on the UCA etc properly to avoid scrubbing. I also would like to get the front wound up slightly to sit level with the rear.

Cheers
John

[TOYZX]

Where's it rubbing?

Sent from my SM-N920I using Tapatalk

[creaky]

Off topic sorry JP106 but do you have the Fox 2.5s or 2.0s ? How do they compare in your opinion to other setups, if you have tried.

Thanks

[JP106]

Where's it rubbing?

Sent from my SM-N920I using Tapatalk

First wheel alignment was just the inner guard. i trimmed according. seemed to be still rubbing higher up on inner guard though on magbe half steering lock. was pulling to the left

Now slightly touching body mount in full lock when in compression etc. and probably same as before in guard.

Off topic sorry JP106 but do you have the Fox 2.5s or 2.0s ? How do they compare in your opinion to other setups, if you have tried.

Thanks

Haven't tried any other fox. Thinking they are the newer 2.5. hit some decent bumps at speed and are smooth as. Handles really well.

[TOYZX]

Time to get the grinder and welder out!

Sent from my SM-N920I using Tapatalk

[JP106]

Time to get the grinder and welder out!

Sent from my SM-N920I using Tapatalk

Do you know of any good places in Sydney that can do this?