Hi all,
Fairly new Hilux owner here (2009 Vigo Champ).
Already fitted custom bullbar, LED bar, winch, and extra battery. Plus a 2" lift kit front and back.
Today I received KTFR101HT (Same height as the 101HD's) Coil Springs from King Springs and tried to fit them onto stock (new) monroe shocks. I found that they were too long and after some further research I found that some people recommended using Extended or Long Travel Shock Absorbers/Higher Travel/Higer Pressure Varient.
If anyone has any experience with this I would be most grateful as I'm somewhat confused as to where to go from here, I could probably force the coil springs onto the monroe shocks using tightening clamps but I'd rather get some second opinions before risking breaking anything.
Many thanks!!