Scangauge ATF/EGT/DPF and Torque Convertor Temp

Scangauge ATF/EGT/DPF and Torque Convertor Temp

Postby Andyfive on Mon, 19 Dec 2016 6:09 +0000

I used these codes and they appear to work ok:

ATF
07E02182
046105820000
2808
00010001FFD8

torque convertor
07e02182
046105820000
3808
00010001ffd8

EGT
Txd o7dfo178
Rxf 054106780000
Rxd 3810
Mth 0001000affd8

DPF
TXD 07DF0178
RXF 032100000000
RXD 2010
MTH 0001000AFFD8
Andyfive
 


 

Re: Scangauge ATF/EGT/DPF and Torque Convertor Temp

Postby numberplate on Wed, 21 Dec 2016 5:27 +0000

kewl , with those temps can you see when a DPF burn occurs?
numberplate
 
Posts: 325
Joined: Mon, 10 Oct 2016 3:31 +0000
Location: QLD

Re: Scangauge ATF/EGT/DPF and Torque Convertor Temp

Postby Andyfive on Wed, 21 Dec 2016 5:47 +0000

I assume so. The DPF got up to 620 degrees the other day, i assume it was doing a burn as the EGT was much lower at the time.
Andyfive
 

Re: Scangauge ATF/EGT/DPF and Torque Convertor Temp

Postby numberplate on Wed, 21 Dec 2016 8:31 +0000

thanks for that. I had thought of wiring an LED across the no5 injector so would get an indication that burn was occuring. might end up getting a scanguage anyway.
numberplate
 
Posts: 325
Joined: Mon, 10 Oct 2016 3:31 +0000
Location: QLD

Re: Scangauge ATF/EGT/DPF and Torque Convertor Temp

Postby fark on Sat, 27 May 2017 5:27 +0000

Does anyone know if the IAT is before or after the intercooler? I can see the IAT on my Scangauge, but i think its basically reading the ambient temp. I was interested to see the temp after the intercooler to see how hot the air was.
Thanks for the codes too Andyfive Andyfive, they work nicely.
User avatar
fark
 
Posts: 75
Joined: Sun, 08 Apr 2007 1:00 +0000
Location: , VIC

Re: Scangauge ATF/EGT/DPF and Torque Convertor Temp

Postby BourkeyRobin on Thu, 11 Apr 2019 6:28 +0000

DPF ACCUMULATION LEVEL
TDX 07E02138
RXF 032104780000
RXD 4008
MTH 000200010000

MANUAL REGEN COMMAND
COMMAND NO =0
3029060101
BourkeyRobin
 
Posts: 2
Joined: Thu, 26 Jul 2018 7:49 +0000
Location: Canberra


Return to Tips & Tricks

Who is online

Users browsing this forum: No registered users and 3 guests