NewHilux.net

Piratepete wrote:There are lots and lots. But i cant go spilling to many beans

What if i told you you could change the tone of your indicators

supermario indicator tones please!

Piratepete wrote:There are lots and lots. But i cant go spilling to many beans

What if i told you you could change the tone of your indicators

Is there a way to disable to seatbelt beep yet?

I also set mine to -40. was a little less sensitive on the freeway this morning. What's more annoying is that the dash lights keep changing at different intervals!!

It would be ideal that if auto lights are triggered, they just remain on for the duration of the trip until the car is switched off again.

first world problems!

Ryan1kd wrote:I knew you were serious bud

Reason being Also, being a Cummins ISX EGR GURU myself, we are told by the dealer to perform burn offs whenever necessary, even if not required....keeping build up to a minimum. It has kept a lot of our burn boxes out of trouble. I'm well aware of it being unnecessary and aren't too phased to let it take care of itself. Was just curious.

I'm surprised that your current speed can not be displayed in the centre info display....or is it a possibility? Piratepete I'm looking in your direction! :p

It is possible for it to do a forced burn but needs to be done through scan tool. One thing that has me thinking is that it might carry out the burn when say 50% full. I know if it get to high it will bring up a message on the dash saying thats its full and cannot complete a burn so it has to be forced with scan tool. So maybe that is how they are covering themselves by doing lots of small burns(20-30mins) instead of big 1-2hr burn off.

I annoyed also that we cant get a digital speedo on the center display. That dash would be 100% complete with that feature. It is possible that maybe later on it could be released, and it might just be a simple flash of ecu, but only time will tell.

sq1nty wrote:

Piratepete wrote:There are lots and lots. But i cant go spilling to many beans

What if i told you you could change the tone of your indicators

Is there a way to disable to seatbelt beep yet?

If you have access to scan tool than yes it is possible. You can turn of drivers, passengers, and also rear seats

Thank you Piratepete for posting this up... my LEd running lights have been driving me insane... on off, on off, on off... Super annoying!

Sooooo, Piratepete, do you happen to know if there is a software way to configure the power window kiddie switch to only work on the rear windows? At the moment it locks all but driver side window.

nicovdw wrote:Sooooo, Piratepete, do you happen to know if there is a software way to configure the power window kiddie switch to only work on the rear windows? At the moment it locks all but driver side window.

I will have to have a look into that. I own the extra cab so I don't have to worry about the rear windows But i'm going to guess that it might not be a customizable feature. I will have a look and let you know what i find

sugaris wrote:Thank you Piratepete for posting this up... my LEd running lights have been driving me insane... on off, on off, on off... Super annoying!

Glad i was able to help everyone out. So i assume by that you have changed yours down to -40 setting.

Piratepete, in fear of pushing the boundaries of your question threshold...I think the question on everyone's lips is....can the rear locker be programmed to be used in 2wd and 4H? Not with the intention to abuse...but for convenience and purely the option.

Double post

I was able to adjust my light settings first go! I cant believe it either!

@Piratepete -40 mate... straight to the least sensitive!

Is it possible to turn off the auto headlights completely?

Piratepete
yes it evens works here in zimbabwe
thanks for your help
2.8 4x4 smart cab REVO

karltr wrote:Is it possible to turn off the auto headlights completely?

technically keeping the lights on all the time will turn off the 'auto' function .

You don't need to remember to turn the lights off as they will go off once the car is switched off and the driver's door opened.

You can also just run the parkers during the day.

I noticed mine were coming on every time a truck came past and put me in its shadow. I've just set mine to -40 so will see how it goes tomorrow morning .

Thanks for taking the time to post the procedure piratepete!

Pirate pete
by any chance did you have the sequence to de beep your seat belts?

Thanks Piratepete. Good post. Solved my issue.