XHPBT1 wrote:What scan tool can I buy so I can play with all these settings
PinzVidz wrote:- Operating power windows via smart entry fob from distance (this can be done with LC200 Sahara, all 150 series Prado, 50 series Camry etc.)
Piratepete wrote:Ok. So don't be upset if you don't get it the first time.
1) switch ignition to on
2) make sure dimmer switch is in lowbeam and not pushed forward into constant high beam
3) turn light switch onto parker setting
4) turn ignition off
5)Hold headlights into highbeam
6)While highbeam is pulled on, turn to headlight than back to parker ( not auto) 5 times
7)Release high beam
( the headlamps will flash in relation to what setting they are currently set on. It should flash 3 times with the setting being 0 )( if they don't flash you and not in the settings.)
8) Hold highbeam on again and turn between headlight and parker setting.
The number of times you turn it will vary the sensitivity.
Once -40
Twice -20
Three 0
Four +20
Five +40
9) Once you have turned between headlamps and parker for your desired preference release the highbeam.
The headlamps will flash for the number that you have selected.
And once it flashes say once, you are all complete [emoji3] [emoji3]
I personally have mine set to -40 and find it perfect but if you want to try -20 give it a shot.
Now bend over touch your toes while turning your head in circles. [emoji14]
SEJ GLX-R wrote:Try this, it worked on mine.....Piratepete wrote:Ok. So don't be upset if you don't get it the first time.
1) switch ignition to on
2) make sure dimmer switch is in lowbeam and not pushed forward into constant high beam
3) turn light switch onto parker setting
4) turn ignition off
5)Hold headlights into highbeam
6)While highbeam is pulled on, turn to headlight than back to parker ( not auto) 5 times
7)Release high beam
( the headlamps will flash in relation to what setting they are currently set on. It should flash 3 times with the setting being 0 )( if they don't flash you and not in the settings.)
Thanks for the info have set mine to -20 and will test over the coming week, hope it stops the issue with trees
8) Hold highbeam on again and turn between headlight and parker setting.
The number of times you turn it will vary the sensitivity.
Once -40
Twice -20
Three 0
Four +20
Five +40
9) Once you have turned between headlamps and parker for your desired preference release the highbeam.
The headlamps will flash for the number that you have selected.
And once it flashes say once, you are all complete [emoji3] [emoji3]
I personally have mine set to -40 and find it perfect but if you want to try -20 give it a shot.
Now bend over touch your toes while turning your head in circles. [emoji14]
Sartor wrote:Just to clear something: which setting do you call "parker" - is it fog lights or regular beam?
Thanks!
Users browsing this forum: No registered users and 2 guests