removing stock front bumper ??

removing stock front bumper ??

Postby rds_929 on Wed, 09 Mar 2016 5:56 +0000

hey guys going have a crack at putting on my bull bar over the week end but have got no idea how you remove the stock bumper any tips or hints would be awsome thanks heaps

ryan
rds_929
 
Posts: 402
Joined: Mon, 01 Jun 2015 6:26 +0000
Location: melbourne , victoria


 

Re: removing stock front bumper ??

Postby jaydo on Wed, 09 Mar 2016 6:10 +0000

Hey mate, I think I have a really basic write up about it on my build thread. If not its really straight forward anyway. This is all just for memory so don't quote me, but I think its all pretty close.

1. Remove the grille. I think there are about 6 plastic pins holding it in. Just get a straight bladed screw driver and lift them out.

2. For memory there are 2 bolts that you need to undo that act as supports for the bumper. Take them out.

3. Undo all the little bolts or clips that hold it onto the wheel arches.

4. Two little clips that hold it in just below the lights. Needs a little bit of force.
User avatar
jaydo
 
Posts: 329
Joined: Fri, 28 Feb 2014 3:16 +0000
Location: Brisbane, QLD

Re: removing stock front bumper ??

Postby rds_929 on Wed, 09 Mar 2016 7:35 +0000

legend thanks bro appreciate it
rds_929
 
Posts: 402
Joined: Mon, 01 Jun 2015 6:26 +0000
Location: melbourne , victoria

Re: removing stock front bumper ??

Postby timgelong on Wed, 31 Aug 2016 7:52 +0000

rds_929 wrote:legend thanks bro appreciate it
How did you go getting it off? I am attempting to do the same.....
timgelong
 
Posts: 4
Joined: Thu, 04 Aug 2016 2:48 +0000
Location: Geelong

Re: removing stock front bumper ??

Postby adamkberger on Wed, 31 Aug 2016 2:35 +0000

Go to this site https://toyotamanuals.com.au/accessories and look up this part number PZQ29-89281. This will give you the instructions for the genuine bulbar which will tell you how to take the front bumper off.
2015 SR5 2.8 Dual Cab Hilux
User avatar
adamkberger
 
Posts: 357
Joined: Thu, 25 Apr 2013 5:30 +0000
Location: Melton, Victoria

Re: removing stock front bumper ??

Postby rds_929 on Wed, 31 Aug 2016 6:31 +0000

timgelong wrote:
rds_929 wrote:legend thanks bro appreciate it
How did you go getting it off? I am attempting to do the same.....


follow jaydo's link not to hard at all could prob just feel your way through it aswell
rds_929
 
Posts: 402
Joined: Mon, 01 Jun 2015 6:26 +0000
Location: melbourne , victoria

Re: removing stock front bumper ??

Postby Kris NT on Sun, 30 Apr 2017 8:15 +0000

What bullbars did you guys put on ?

I have a Tjm T13 bar , I rang Tjm and they want near $700 just for fitting, I want to have a crack myself ... i am a little concerned about cutting the bumper bar for the infills


Sent from my iPhone using Tapatalk
If it has tits or wheels ....it'll cost ya money
User avatar
Kris NT
 
Posts: 128
Joined: Sun, 20 Nov 2016 10:57 +0000
Location: Darwin NT


Return to Tips & Tricks

Who is online

Users browsing this forum: No registered users and 7 guests