Six speed N80 Hilux auto trans fluid level
Posted: Tue, 04 May 2021 6:22 +0000
Hi,
Can anyone tell me the correct temperature setting for the fluid level with the no dipstick transmissions.
Have previously done fluid flush & set the level after a short drive to warm things up to operating temperature.
Overfilled the tranny by approx. 500 ml & dropped the level plug until a trickle of fluid & replace the plug. This procedure seems to work fine.
However I would like to be a bit more accurate, don't have a scan gauge & use an infrared digital thermometer which works fine on the pan.
Have checked various web sites, some say 46 degrees c, others say 40 to 45 degrees c & the last was 46 to 56 degrees c.
I have set mine at 53 degrees c at present.
Appreciate any information as to the correct temperature setting. Thank you.
Can anyone tell me the correct temperature setting for the fluid level with the no dipstick transmissions.
Have previously done fluid flush & set the level after a short drive to warm things up to operating temperature.
Overfilled the tranny by approx. 500 ml & dropped the level plug until a trickle of fluid & replace the plug. This procedure seems to work fine.
However I would like to be a bit more accurate, don't have a scan gauge & use an infrared digital thermometer which works fine on the pan.
Have checked various web sites, some say 46 degrees c, others say 40 to 45 degrees c & the last was 46 to 56 degrees c.
I have set mine at 53 degrees c at present.
Appreciate any information as to the correct temperature setting. Thank you.