Page 1 of 1

Scangauge setting for 2019

PostPosted: Fri, 06 Mar 2020 4:56 +0000
by jazzi
Hi Guys,
Is there any one have setting EGT and DPF shoot % for 2019?
I used this following for DPF Shoot % and i think reading is incorrect. its show 300


DPF
TXD 07DF0178
RXF 032100000000
RXD 2010
MTH 0001000AFFD8

Thanks

Re: Scangauge setting for 2019

PostPosted: Fri, 06 Mar 2020 5:12 +0000
by numberplate
DPF Level Accumulation Guage ( DPA ) ( in % )
TXD: 07E02138
RXF: 032104780000
RXD: 4008
MTH: 000200010000 ( x2 % ) or 000100010000 ( x 1 % )


this works on my 2019

Re: Scangauge setting for 2019

PostPosted: Fri, 06 Mar 2020 7:52 +0000
by Andyfive
This works on a 2016.

Look here https://www.scangauge.com.au/toyota-x-gauges/

Re: Scangauge setting for 2019

PostPosted: Mon, 09 Mar 2020 4:55 +0000
by jazzi
Hay mate,
What's the maximum reading you getting. Mine showing 96.
around what level it start burning?
Sorry for all the questions mate.
Thanks

numberplate wrote:DPF Level Accumulation Guage ( DPA ) ( in % )
TXD: 07E02138
RXF: 032104780000
RXD: 4008
MTH: 000200010000 ( x2 % ) or 000100010000 ( x 1 % )


this works on my 2019

Re: Scangauge setting for 2019

PostPosted: Tue, 10 Mar 2020 4:59 +0000
by numberplate
Mine starts at around 100% , then burns down to about 4%. worst ive ever seen it was 130% but that was with the last car and a buggered DPF

Re: Scangauge setting for 2019

PostPosted: Tue, 10 Mar 2020 9:29 +0000
by jazzi
Thanks mate. Its do the same thing on mine. but i cant see massive increase on EGT reading.

numberplate wrote:Mine starts at around 100% , then burns down to about 4%. worst ive ever seen it was 130% but that was with the last car and a buggered DPF