I wish
None of that is available for hilux, just buzzers for seat belts, volume of indicators blinking, volume of chirping noise when locked or unlocked and number of times indicators blink. Thats it for customisation for hilux.
ptommo59 wrote:Hi Andre,
The Euro5 1KD never came here to OZ so no one has been able to work out the codes for the DPF system for it and from previous members from Europe's tests the 1GD PM Accumulation etc codes don't seem to work.
The EGR command won't help as the valve also closes at other times other than DPF burns.
What EGT Temp Codes did you already try?
Should have EGT B1S1 (Turbo output), EGT B1S2 (Cat output) & EGT B1S3 (DPF output) and the last two will go above 600 degrees C when the DPF burn is happening.
These are the standard OBDII mode 01 codes for those:
TXD: 07DF0178
RXF: 054106780000
RXD: 3810
MTH: 0001000AFFD8
Name: EGT (B1S1)
TXD: 07DF0178
RXF: 054106780000
RXD: 4810
MTH: 0001000AFFD8
Name: CAT (B1S2 - goes up in around 26 degrees C increments as the scangauges cant combine data from two frames so missing lower 8 bits)
TXD: 07DF0178
RXF: 032100000000
RXD: 2010
MTH: 0001000AFFD8
Name: DPF (B1S3)
Don't know if anyone has tried these, but if above codes don't work, try these as Toyota duplicates some mode 01 info under mode 21:
TXD: 07E02178
RXF: 056106780000
RXD: 3810
MTH: 0001000AFFD8
Name: EGT
TXD: 07E02178
RXF: 056106780000
RXD: 4810
MTH: 0001000AFFD8
Name: CAT (goes up in around 26 degrees C increments as SG cant read lower 8 bits in next frame)
TXD: 07E02178
RXF: 032100000000
RXD: 2010
MTH: 0001000AFFD8
Name: DPF
Users browsing this forum: No registered users and 10 guests