Gen 8 Catch Can

Turbo, Manifolds, Exhaust, Intercooler, Internals etc

Gen 8 Catch Can

Postby Hiluxtorv on Tue, 30 May 2017 9:21 +0000

Hey everyone,
My names Jackson, recently purchased a 2.4 turbo diesel workmate with the 2gd engine. Done 8000ks and loving it!

Im looking into fitting a oil catch can as I have noticed a lot of people on here doing. I have noticed lots of people using the provent 200,but being an apprentice can't exactly justify spending that amount on the hilux kit, or buying the hpd catch can :/
Has anyone else fitted a catch can to their new hilux that was around $100 or less?
I did pick up a cheap D1 racing catch can like you find on ebay but the inlet sizes are too small for the pcv hose on our hilux's. So I don't think I'll be using it.
Does anyone have an alternative?
Also, anyone else running a catch can seeing the benefits? Pros and cons?
Thanks everyone

Sent from my SM-G930F using Tapatalk
Hiluxtorv
 
Posts: 54
Joined: Tue, 09 May 2017 9:53 +0000
Location: Australia


 

Re: Oil catch can alternative???

Postby TOYZX on Wed, 31 May 2017 4:52 +0000

Pros, clean engine!!!! Cons, none! Ya could pick up the provent for about 160 and make your own bracket if needed. Mine is just bolted to the inner guard, previous model tho.

Sent from my SM-N920I using Tapatalk
User avatar
TOYZX
Moderator
 
Posts: 2919
Joined: Wed, 08 May 2013 7:58 +0000

Re: Oil catch can alternative???

Postby cooganstein on Wed, 31 May 2017 7:37 +0000

Just use a reducer to butt join the two different size hoses with the can u bought.
cooganstein
 
Posts: 115
Joined: Mon, 13 Aug 2012 6:07 +0000
Location: Cairns QLD

Re: Oil catch can alternative???

Postby Hiluxtorv on Wed, 31 May 2017 9:01 +0000

TOYZX wrote:Pros, clean engine!!!! Cons, none! Ya could pick up the provent for about 160 and make your own bracket if needed. Mine is just bolted to the inner guard, previous model tho.

Sent from my SM-N920I using Tapatalk

Any photos of your bracket? From what I can see it looks like you need to make a circular bracket to compress around it, are there any threaded mounting holes on it?


Sent from my SM-G930F using Tapatalk
Hiluxtorv
 
Posts: 54
Joined: Tue, 09 May 2017 9:53 +0000
Location: Australia

Re: Oil catch can alternative???

Postby Hiluxtorv on Wed, 31 May 2017 9:02 +0000

cooganstein wrote:Just use a reducer to butt join the two different size hoses with the can u bought.

Would reducing the hose size cause problems? It's a big difference between the two, would there be any disadvantages of stepping the size down?

Sent from my SM-G930F using Tapatalk
Hiluxtorv
 
Posts: 54
Joined: Tue, 09 May 2017 9:53 +0000
Location: Australia

Re: Oil catch can alternative???

Postby TOYZX on Wed, 31 May 2017 1:20 +0000

Will pressurize the crankcase downsizing too much! The provent comes with a bracket for mounting. I just put nutserts in the guard for strength but ya could get away with selftappers if ya dont do much offroading. Serch for the write up that the roo did. Mine is the same.

Sent from my SM-N920I using Tapatalk
User avatar
TOYZX
Moderator
 
Posts: 2919
Joined: Wed, 08 May 2013 7:58 +0000

Re: Oil catch can alternative???

Postby cooganstein on Wed, 31 May 2017 2:45 +0000

If the catch can didn't have a suitable size inlet that would be odd wouldn't it?
cooganstein
 
Posts: 115
Joined: Mon, 13 Aug 2012 6:07 +0000
Location: Cairns QLD

Re: Oil catch can alternative???

Postby Toeknee2 on Fri, 02 Jun 2017 11:12 +0000

If you are still under new car warranty get your Toyota dealer to give you the all clear in writing, otherwise your engine warranty will be void.
Also consider a water trap.
Toeknee2
 
Posts: 187
Joined: Thu, 24 Nov 2016 2:47 +0000
Location: Melbourne

Re: Oil catch can alternative???

Postby Hiluxtorv on Sat, 03 Jun 2017 4:32 +0000

Ended up just getting the provent 200,was a bit more than I wanted to spend but comes with everything you need from Western filters. They didn't have any mounting brackets so I made my own [THUMBS UP SIGN][THUMBS UP SIGN]
Image

Sent from my SM-G930F using Tapatalk
Hiluxtorv
 
Posts: 54
Joined: Tue, 09 May 2017 9:53 +0000
Location: Australia

Re: Oil catch can alternative???

Postby Toeknee2 on Sat, 03 Jun 2017 9:31 +0000

good job
Toeknee2
 
Posts: 187
Joined: Thu, 24 Nov 2016 2:47 +0000
Location: Melbourne

Re: Oil catch can alternative???

Postby Festus Magnus on Sat, 03 Jun 2017 3:55 +0000

Toeknee2 wrote:If you are still under new car warranty get your Toyota dealer to give you the all clear in writing, otherwise your engine warranty will be void.
Also consider a water trap.


Genuine question, I thought it was the car manufacturer (and not the dealer) which warranties new cars? Would a dealer-issued letter, therefore, have any legitimacy if a warranty dispute arose? I thought that all warranty repairs had to be requested by the dealer from Toyota Australia for approval, and that the dealer otherwise has no authority over whether an issue is determined to be within scope of the warranty.

For used cars, on the other hand, that may be sold with a dealer warranty, then yeah, I'd imagine that a dealer-issued letter would be useful for aftermarket accessories.
Festus Magnus
 
Posts: 18
Joined: Mon, 25 Jul 2016 2:17 +0000
Location: Sydney

Re: Oil catch can alternative???

Postby Hiluxtorv on Sun, 04 Jun 2017 9:26 +0000

Has anyone fitted a provent 200, what do you do with the adjustable valve on the side near the bottom outlet? Do you loosen it off or leave it tightened up? Not too sure how it was from new as I was fiddling with it in store when I bought it. Any ideas?

Sent from my SM-G930F using Tapatalk
Hiluxtorv
 
Posts: 54
Joined: Tue, 09 May 2017 9:53 +0000
Location: Australia

Re: Oil catch can alternative???

Postby Toeknee2 on Wed, 14 Jun 2017 7:47 +0000

Festus Magnus wrote:
Toeknee2 wrote:If you are still under new car warranty get your Toyota dealer to give you the all clear in writing, otherwise your engine warranty will be void.
Also consider a water trap.


Genuine question, I thought it was the car manufacturer (and not the dealer) which warranties new cars? Would a dealer-issued letter, therefore, have any legitimacy if a warranty dispute arose? I thought that all warranty repairs had to be requested by the dealer from Toyota Australia for approval, and that the dealer otherwise has no authority over whether an issue is determined to be within scope of the warranty.

For used cars, on the other hand, that may be sold with a dealer warranty, then yeah, I'd imagine that a dealer-issued letter would be useful for aftermarket accessories.


If you google the question you will soon find some experts talking about it.
I'd like to put a catch can and a water trap on mine but I'm not comfortable just yet, I need more info before I commit.
Toeknee2
 
Posts: 187
Joined: Thu, 24 Nov 2016 2:47 +0000
Location: Melbourne

Best Catch Cans

Postby ronnyle on Fri, 15 Jun 2018 12:03 +0000

Hi I was wondering what are the best catch cans that are out there to be fitted and is it easy to install?
ronnyle
 
Posts: 7
Joined: Tue, 28 Mar 2017 12:29 +0000
Location: Victoria

Re: Gen 8 Catch Can

Postby DeadlyBeast on Fri, 15 Jun 2018 6:24 +0000

Title edited for al things Gen 8 catch can
Threads merged

A lot more information can be found by using the search here! function near the top
Below is what comes up when enter catch can into that box:
CATCH CAN

If its under warranty get your dealer to install - Toyota blame dead turbos on bolts droping into turbo during catch can installation
________________________
2007 SR5 D4D Auto
2014 SR D4D Auto
Build Thread
DeadlyBeast
Moderator
 
Posts: 1914
Joined: Sat, 26 May 2012 7:42 +0000
Location: Top End

Re: Gen 8 Catch Can

Postby Deuscartel on Fri, 27 Jul 2018 6:39 +0000

Hi guys, after some advice. My SR5 was one of the first off the boat and is coming out of warranty this November. She has done 60,000 KM. I am looking at installing a Taipan XP billet catch can. Is it worth trying to clean the air intake manifold after install? There are plenty of spray foams ect that could be used, or would I be better opening her up and giving her a good clean? Any advice would be appreciated.


Sent from my iPhone using Tapatalk
User avatar
Deuscartel
 
Posts: 57
Joined: Mon, 06 Mar 2017 5:23 +0000
Location: Lake Macquarie NSW

Re: Gen 8 Catch Can

Postby The Electrician on Thu, 31 Jan 2019 10:31 +0000

Provent 200 along with ultra efficient filtration medium LC5002X is the best catch can in market

Here is the cheepest place you can order LC5002X from

https://www.dieselfiltersonline.com/lc- ... lator.html

Also, here is a comparison between different brands of catch cans

http://www.unsealed4x4.com.au/u4x4/issu ... Send+1#113

You'll be surprised to know that all aluminum bodied catch cans in this comparison (HPD, TiapanXP bilet, Calibre Polished 400cc) are the worst, with inferior filteration performance.
Last edited by The Electrician on Sat, 02 Feb 2019 5:04 +0000, edited 1 time in total.
The Electrician
 
Posts: 34
Joined: Sat, 20 Feb 2016 8:21 +0000
Location: Mecca, SAudi Arabia

Re: Gen 8 Catch Can

Postby Phrancis on Sat, 02 Feb 2019 1:11 +0000

I fitted the Provent 200 about 6 months ago, works a treat.
Phrancis
 
Posts: 49
Joined: Sun, 06 Aug 2017 5:24 +0000
Location: Sydney NSW

OIL + CATCH CANS

Postby ieattrolls08 on Thu, 18 Jul 2019 7:31 +0000

Hey guys,

Quick questions... (regarding 2.8 TD)

Will installing a Provent Oil Catch can void my warranty? I'm thinking that i should just ask my dealer?

Also, can anyone tell me what oil Toyota would be putting in during service? I am assuming 5W-30, not sure if anyome knows any different?

Cheers
ieattrolls08
 
Posts: 6
Joined: Fri, 10 Nov 2017 8:45 +0000
Location: Australia

Re: OIL + CATCH CANS

Postby Gipsy on Fri, 19 Jul 2019 6:46 +0000

Ask your dealer and the catchcan should be ok but get a letter from them confirming it.

The oil is variable as "Toyota oil" is whatever, depends on the dealer but would almost certainly be 5w30. Some dealers use Valvoline and others use what they get a good deal on and then put the "Toyota oil" sticker on.

Last dealer service on my Aurion had the Toyota sticker but I watched them put Valvoline engine armour in it :?

Why do you ask? Is it because you will do your own service? If so any quality oil will be fine but the 5w30 could be too light if you are not in a cold area. Consult the owners manual and use what the temperature chart suggests for your temperature range. I use 15w50 Penrite (1kd 3.0) but you would need something that is ok for dpf.
Cheers Gipsy :D although I'm sure somebody will challenge that :lol: even Einstein wasn't certain of his theories.
My 2013 auto D4D DC SR5, prefilter, 3" exhaust and Chip with egt probe, stock SR5 rims with Toyo Open Country AT2 265/65R/17's
Gipsy
 
Posts: 2135
Joined: Tue, 07 May 2013 2:00 +0000
Location: South Coast NSW and all over Oz

Next

Return to Engines

Who is online

Users browsing this forum: No registered users and 3 guests