Hi guys, need to know what I’ve done here…
Not a Hilux, but a 120 Prado v6
Just finished wiring up led spots and a light bar, both with harnesses. Spots are Earthlight with XTM harness, Led bar is kings with kings harness.
All wired up ok, test time and spots / led come on with low beam and off with high beam, so reverse polarity at lights with plug and play harnesses for spots / led to come on with high beam and off with low. All good, this works, but now lights are high beam on low beam and low beam on high, obviously as I reversed polarity.
Advice appreciated, mechanically minded, but not electrically!!! Hate electrics [emoji23][emoji23]
Cheers [emoji482]
Sent from my iPhone using Tapatalk