Hi everyone,
Just wondering if I can get some assistance. I am installing a light bar. I bought a new wiring harness: http://tinyurl.com/y4wfzybw - This kit also has the HB3 connector so it works in sync with the high beam. I am removing the standard switch they supply and replacing it with one that fit in the spare switch spots: http://tinyurl.com/y5qxpk5x
I have wired up everything on the relay side: E.g. Power/ground/plugging into headlight & light bar. Just need assistance with the switch wiring.
So just need a hand with matching the wires:
-HARNESS-
BLACK WIRE (HARNESS) - GROUND
BLUE WIRE (HARNESS) - POWER
WHITE WIRE (HARNESS) - ACCESSORY
---------
-SWITCH-
BLUE WIRE (SWITCH) - POWER
GREEN WIRE (SWITCH) - RELAY OR ACCESSORY
YELLOW WIRE (SWITCH) - DASH LIGHT CIRCUIT
BLACK WIRE (SWITCH) - GROUND
---------
Please let me know if my assumption below is correct:
CONNECT BLUE (HARNESS) & BLUE (SWITCH)
CONNECT WHITE (HARNESS) & GREEN (SWITCH)
CONNECT YELLOW (SWITCH) INTO FUSE VIA FUSE TAP TO WORK WHEN DASH LIGHTS ON
CONNECT BLACK (HARNESS) TO BLACK (SWITCH) AND GROUND IT ON A BODY GROUND
Is my assumption correct?
Thanks guys!