NewHilux.net

Any chance you can put up the links to the lights and any other items needed to install them for us?

They're really the only thing I wanted out of the Sr5.

Cheers mate.

corym wrote:Any chance you can put up the links to the lights and any other items needed to install them for us?

They're really the only thing I wanted out of the Sr5.

Cheers mate.

I bought off ebay genuine headlamp assy, 81150-0K720 and 81110-0K720 http://www.ebay.com.au/itm/231837356635 ... EBIDX%3AIT
List price at the dealer is approx 1126.01+GST each i think, you can try you may be surprised.
And you need the adapter leads: http://www.ebay.com.au/itm/231854757882 ... EBIDX%3AIT

Please remember I make no guarantees as the bottom mount on the lamps does not fit up to my car, the other 4 mounting points do and the bumper clips into it fine. Also if you have a painted bumper be very gentle un-clipping it where it meets the guard.

This is a pic of the old halogen headlamp, the bolthole on the left bolts up to the car body and the one on the right is at a different height and swings in the wind, the projector lamp only has the one on the right molded into the plastic housing for whatever reason.
The bolts are M6 and you could make a simple bracket to make it work properly but I didn't bother.

So really you just need the lamps, adapters, a few basic tools, maybe make a little bracket and 1 extra person is handy when removing the bumper.

Hi,

I just wonder your newly bought Projector Headlamp with LED DRL wiring connection fit the original Multi reflector headlamp? My SR seems to be the wiring straight from the original pack of wire straight to the headlamp bulb. How to plug and play?

I know this is a older Thread but I bought the same wiring kit and I did a quick plug in the daytime lights work and the headlight beams but what about the two holes in the headlight??? Lefts for blinker and rights for? Did you buy the plugs for the blinker and the other hole from Toyota? Also how do the high beams work? Do they run from the headlights or from the hole on the right? But the harness only comes with 4 plugs but 5 points to conect?

I know this is a older Thread but I bought the same wiring kit and I did a quick plug in the daytime lights work and the headlight beams but what about the two holes in the headlight??? Lefts for blinker and rights for? Did you buy the plugs for the blinker and the other hole from Toyota? Also how do the high beams work? Do they run from the headlights or from the hole on the right? But the harness only comes with 4 plugs but 5 points to conect?

Hi, just wondering if there is a easy answer and solution to fit SR5 hid head light assembly's to a standard 2017 SR?
I have seen these led headlights and wondering has anyone fitted them and are they any good and are they legal? Thanks

Threads merged
Link removed

Has anyone else had any luck with this?? I would be interested if everything works the way it should..

Hi All, ant updates for this?, pretty keen to go ahead with conversion, cheers phil

Just giving this a bump. Anyone done this on the 2020+ models?