don_mabb wrote:Hi Adrian,
I've got the Supacentre harness with the round switch, and I'm also waiting for my Newtech Pro switch to arrive.
Meanwhile, on the Supacentre harness switch, (at least on the one I have) the red wire is the +ve 'supply' wire and comes from the high beam feed through the headlight connector; the white wire is the load/switched power wire which goes to the relay (no 85 on harness); and the black is the earth, which goes back to earth through the headlight connector.
According to the circuit diagram that NTP sent me when I ordered the switch, the green wire from the NTP switch would connect to the red on the 4WDSC one (supply), the Red with yellow trace on the NTP to the white on 4WDSC (load/switched power) and black to black (earth). Hopefully I'll have my NTP switch in a few days or so and also hopefully the wiring colour will match what was in their email. I'll see how it all works.
Awesome thanks Don,
I am waiting on my switch to arrive, at least you have given a person with no idea a starting point.
cheers
Adrian