NewHilux.net

dr.lux13 wrote:Would it void toyotas warranty if we were to get an e locker installed?? It's always a big question with doing internal stuff to your cars! Mmm??

if you blew a diff, yep for sure it would.

OTOH, we're simply correcting a design omission!

^agree. Can't expect warranty on a part a third party has supplied and had apart.

I blew my diff yesterday, can i just get an elocker installed or do I have to get it rebuilt first.

Depending on what you blew, but most likely new gearing for the new centre

Haven't opened it up yet. But happened in reverse

$750 for a new set of gears (front only) so i found out recently.

Anyone fitted in front of hilux 07-->. As im on to it as we speak just waiting for my spesial dial indicator 90' angle arm.. Would be nice to hear your installation experience. How much do you guys grind down on the case where the magnet makes contact. As under testing yesterday it all worked fine without grinding. But wil start grinding tommorow

Cheerz from norway

if you havent fitted one in front your self dont comment.. As it is hard enough to find right info on eaton as it is

hi all, new to forum,
am looking of putting both in into my 06 SR D4D
found this, http://www.terraintamer.com/ee/4wd-products/elocker
video is somewhat informative and has part numbers and misc info down the page

SR5 2NV wrote:I blew my diff yesterday, can i just get an elocker installed or do I have to get it rebuilt first.

might as well regear while you have it apart (assuming u have bigger tyres)

packeteer wrote:

SR5 2NV wrote:I blew my diff yesterday, can i just get an elocker installed or do I have to get it rebuilt first.

might as well regear while you have it apart (assuming u have bigger tyres)

Ended up just putting a reco diff in

getting the rear done today, will be trying out in Wilbinga on the weekend, cant wait

for those interested;
had it done by opposite lock in welshpool, in/out same day, talk to Russ, he undersold and over delivered, in fact I wanted both the front and rear, he said try just rear first and if you still feel you need front then come back.
I'm very happy with the service

just on the topic of e-lockers. Has anyone had any experience with Ironman with theirs? They install the eaton locker as well however they only want 2000 for locker + installation. Opposite lock across the road with the same e locker want 2300. Anyone had any experiences?

My Eaton Harrop elocker was $2000 supplied and installed by a specialist transmission shop.
I think the elocker itself was $1600 supply only.
Cheers.

Hello I need a courtesy, I can not find in the guide of the Eaton E -locker model for hilux rear of 2009, http://www.eaton.com/ecm/groups/public/@pub/@eaton/@per/documents/content/ct_128302.pdf it appears that there is no longer produced, you know the exact code? Thanks as always to availability.
Happy 2016 to all

nicola wrote:Hello I need a courtesy, I can not find in the guide of the Eaton E -locker model for hilux rear of 2009, http://www.eaton.com/ecm/groups/public/@pub/@eaton/@per/documents/content/ct_128302.pdf it appears that there is no longer produced, you know the exact code? Thanks as always to availability.
Happy 2016 to all

Google Harrop Engineering. Then email Harrop.

Is this e-locker also the one that is factory supplied with some models of Hilux Vigo?

I've just ordered my hilux (hope to pick it up in a few weeks) and it has got a factory fitted read locker (it's a 2.5 manual)

HI
I can not even find it on the site Harrop, am I an idiot? There is now only at the front? What do you think is the code for hilux 2009.

Thanks

nicola wrote:HI
I can not even find it on the site Harrop, am I an idiot? There is now only at the front? What do you think is the code for hilux 2009.

Thanks

http://www.harrop.com.au

"ELocker/Toyota/8.4"/Live Axle" is listed as fitting "Toyota Hi Lux 1990-Current, Rear"

Suggest you email Harrop's to confirm.

Either way a rear Elocker is available because several of us have them

Exactly ..... I know that many of you have it
8,4"

Thanks