CV angle opinions

Gearboxs, Transfers, Tailshafts, Diffs, axles and CVs

CV angle opinions

Postby supdawk on Sat, 07 Nov 2020 4:41 +0000

Hey lads,
Just installed a 2inch lift kit today and want to know your thoughts/opinions on whether my cv angle is fine or will I need to get a diff drop...

Pic below:
Image
https://ibb.co/DQfdJ7j

Image
supdawk
 
Posts: 13
Joined: Thu, 20 Aug 2020 11:20 +0000
Location: Panania, NSW


 

Re: CV angle opinions

Postby dave g on Sat, 07 Nov 2020 7:01 +0000

I would drop the diff you will brake one for shore
What was the measurements before the lift
dave g
 
Posts: 725
Joined: Fri, 18 Oct 2013 6:59 +0000

Re: CV angle opinions

Postby specwarop on Sat, 07 Nov 2020 7:09 +0000

Is there much point in a lift kit if the diff needs to be dropped anyways, eroding any clearance gains?
specwarop
 
Posts: 151
Joined: Sat, 02 May 2020 7:26 +0000
Location: Perth, WA

Re: CV angle opinions

Postby hiluxxury on Sun, 08 Nov 2020 9:36 +0000

Key thing with lift kits causing CV problems is droop. If the lift gives you more droop then you are more likely to blow a CV as the CV angles are increased (they are weaker at angle and are weakest at the maximum angle).

Jack the front up and see if you can turn the wheel by hand. If you cant, the inner CV is binding so you definitely need a diff drop. I'd recommend a good quality diff drop kit anyway - not the spacer type.

The small footprint of the dropped diff isnt anything I worry about.
I might be wrong.

2005 SR Hilux 1KD - SOLD
2009 BMW X5 - destroyed by a hail storm
2012 Range Rover Sport SDV6 - SOLD
2015 Ford Ranger
User avatar
hiluxxury
Moderator
 
Posts: 1584
Joined: Sun, 20 Dec 2009 4:16 +0000
Location: Tasmania

Re: CV angle opinions

Postby Sparksy on Mon, 09 Nov 2020 2:33 +0000

If the boot is rubbing against itself while sitting level, yeah I would recommend one. That looks 50/50 either way to me.
User avatar
Sparksy
 
Posts: 166
Joined: Thu, 08 Apr 2010 9:00 +0000
Location: Sydney


Return to Drive Train Components

Who is online

Users browsing this forum: No registered users and 8 guests