ADD & Regear

[FAIL]

Hey all, I've been reading through and couldn't find the exact info here so I thought I best just ask, I have a 2015 SR5 auto with 3.9 gears, I'm currently running 33's and have been considering either doing 4.1's ORRRRRR making the leap and fitting 35's and do 4.56's but my question is this, I know that if I were to fit a Prado 4.1 front diff that I will lose ADD but if I were to fit say the Nitro 4.11 or 4.56 front will I retain the ADD?

Cheers Brett

[dano85]

If you are talking an n70? You can just swap your axle tube from your diff onto the prado diff.

[TOYZX]

I've been wondering this myself and got told there is a difference in the centre where the axle goes that is different for the add diffs.

Sent from my SM-G955F using Tapatalk

[Ben80]

You can swap the add axle tube onto the prado diff. I have done it on mine went from 3.58 to 3.9.

[knuckles]

Hey mate,
Did you change you front and rear diff over with the Prado 120 series.
I’m looking at doing the same.
Did it work ok?

[knuckles]

Hey mate,
Did you change you front and rear diff over with the Prado 120 series.
I’m looking at doing the same.
Did it work ok?