Page 2 of 2
Re: gearbox swapping.
Posted:
Tue, 03 Feb 2015 9:20 +0000by Philby
packeteer wrote:cheers for that mate. awesome work!
My pleasure.. A big thanks goes to Gulfstream for saving my photo's....
Re: gearbox swapping.
Posted:
Tue, 03 Mar 2015 5:24 +0000by Gulfstream8
Philby wrote:packeteer wrote:cheers for that mate. awesome work!
My pleasure.. A big thanks goes to Gulfstream for saving my photo's....
Ha ha no worries mate - there was no way I was going trash can the photos of all that work you did
Has to be one of the best SR5's on the road with beautifully slick 6-Speed Box and TRD Supercharger with Tacoma ECU software ----- absolutely awesome
Re: gearbox swapping.
Posted:
Sun, 01 Sep 2019 7:43 +0000by leghorn
with the upgrade to the "6 spd prado gearbox", and "input shaft changed to mount the transfer case correctly".
What clutch will be used for this to work a "prado clutch or a hilux clutch"???
missing information needed to complete conversion required, thanks
Re: gearbox swapping.
Posted:
Sat, 12 Oct 2019 8:18 +0000by Philby
I made contact with NPC in Brisbane and they supplied a steel flywheel allowing a bigger friction/pressure plate to be used.
If your not keen to go down the steel flywheel path, I'm sure they'll have a clutch that will do the job with the std flywheel.
I had to re-sleeve the std Hilux slave cyl down to 11/16" (17mm) to get suitable travel to provide smoother gear changes.
Re: gearbox swapping.
Posted:
Sun, 13 Oct 2019 4:38 +0000by TOYZX
I've contacted that mob twice now looking for bits for my ute and no response. Too hard apparently.
Sent from my SM-G955F using Tapatalk