gearbox swapping.

[Philby]

cheers for that mate. awesome work!

My pleasure.. A big thanks goes to Gulfstream for saving my photo's....

[Gulfstream8]

cheers for that mate. awesome work!

My pleasure.. A big thanks goes to Gulfstream for saving my photo's....

Ha ha no worries mate - there was no way I was going trash can the photos of all that work you did

Has to be one of the best SR5's on the road with beautifully slick 6-Speed Box and TRD Supercharger with Tacoma ECU software ----- absolutely awesome

[leghorn]

with the upgrade to the "6 spd prado gearbox", and "input shaft changed to mount the transfer case correctly".
What clutch will be used for this to work a "prado clutch or a hilux clutch"???

missing information needed to complete conversion required, thanks

[Philby]

I made contact with NPC in Brisbane and they supplied a steel flywheel allowing a bigger friction/pressure plate to be used.
If your not keen to go down the steel flywheel path, I'm sure they'll have a clutch that will do the job with the std flywheel.
I had to re-sleeve the std Hilux slave cyl down to 11/16" (17mm) to get suitable travel to provide smoother gear changes.

[TOYZX]

I've contacted that mob twice now looking for bits for my ute and no response. Too hard apparently.

Sent from my SM-G955F using Tapatalk